Products

Plurafac® LF-901 is a nonionic surfactant with low foaming properties. It is made up of predominantly unbranched fatty alcohols that are alkoxylated with both higher alkene oxides and ethylene oxide. This 100% active product provides benefits such as low foaming solutions and wetting capabilities.

Sokalan® CP 10 is a dispersing ingredient that functions as a performance booster and is available as a fully neutralized version (pH approximately 8.5) in approximately 45% liquid form. This product finds applications in hard surface cleaning, food and beverage processing, food service and kitchen hygiene, commercial laundry, institutional cleaning and sanitation, and vehicle and transportation care.

Sokalan® PA 15 is a performance booster and dispersing ingredient that can be used in dishwashing applications. It prevents the redisposition of suspended soils back onto surfaces with good dispersancy. The product helps to enhance cleaning efficiency and reduce spotting and streaking.

Sokalan® HP 66 K is a modified copolymer of vinylpyrrolidone and vinylimidazole and is available in liquid form with a concentration of approximately 41%. It offers significantly better performance compared to PVP, with higher activity and better solubility in detergents than Sokalan® HP 56 K.

Lutensol® XP 40 is a nonionic surfactant manufactured by causing a C10-alcohol to react with ethylene oxide in stoichiometric proportions. It is a cloudy liquid at room temperature and tends to form sediment. The numeric code in the product name indicates the general degree of ethoxylation.

Plurafac® LF 403 is a low-foaming nonionic surfactant composed of predominantly unbranched fatty alcohols alkoxylated with higher alkene oxides and ethylene oxide. Its most important properties are wetting, low-foaming, or even defoaming, making it an excellent choice for controlling foam, particularly when used in combination with Glucopon® surfactant and Deriphat® 160 C.

Plurafac® LF 221 is a surfactant that consists of alkoxylated, mostly unbranched fatty alcohols and higher alkene oxides, in addition to ethylene oxide. It is suitable for use in low-temperature cleaning applications, specifically those at or below 45°C. It can be easily incorporated into highly acidic cleaners.

Pluronic® L62 LF is a 100% active product that is suitable for use in both high- and low-temperature commercial dishwashing machines. The choice of the final surfactant depends on the formulation. It is listed on the EPA's Safer Chemical Ingredients List.

Sokalan® PA 30 CL PN Granules are partially neutralized and available as granules with a concentration of approximately 49.5%. The product exhibits excellent performance properties, including scale inhibition and good dispersancy, and helps prevent the re-deposition of suspended soils back onto surfaces.

Dehypound® HDG is a non-ionic surfactant blend that provides excellent multi-soil heavy-duty cleaning and degreasing performance. Its compatibility with a wide variety of home care and I&I blends, nonionic, anionic, cationic (including quaternary) and amphoteric surfactants, as well as strong acids and strong alkalis, gives you great formulating flexibility and allows you to create products for a wide range of applications, from industrial to food service and many more. Dehypound® HDG offers exceptional performance, easy formulating, and new opportunities.

Rheovis® AT 120 offers detergent formulators multiple benefits, such as its high thickening efficiency, improved rheology profile (shear thinning), and its ability to be post-added in a typical manufacturing process. It can effectively produce transparent liquid detergents, improve the pumping response of liquid detergents, and is highly compatible with other detergent components.

Pluronic® L 81 is a low-foaming surfactant that is 100% active and suitable for use in low-temperature commercial dishwashing machines. It provides good defoaming and wetting properties, making it suitable for use in food service and kitchen hygiene applications. The product is listed on Safer Choice. Pluronic® L 81 is commonly used in automatic dishwashing and bottle wash applications.

Trilon® C Liquid 50% is a clear, amber, aqueous solution of pentasodium diethylenetriaminepentaacetate (Na5DTPA) that is effective in systems where the chelating agent must compete with other complexing materials and be compatible with concentrated electrolytes. It is used to soften water and remove traces of alkaline earth and heavy metals.

Lutropur® MSA is a high-purity, readily biodegradable, and less corrosive strong acid with a low vapor pressure and a high dissolving capacity on many scales. Lutropur® MSA has synergy with certain acids and also with Trilon® M (a chelating agent) on many scales. It is an excellent product for removing dye or pigment-type soils. Additionally, it is listed on the EPA’s Safer Chemical Ingredients List.

Dehypound® M is a high-performance, sustainable non-ionic surfactant blend that offers versatility for multiple soils and applications in Home Care, I&I, and car wash cleaners. Its powerful cleaning capabilities without the use of solvents, combined with its low film and streak performance, make it an ideal choice for hard surface cleaners. Furthermore, its foam profile enables a variety of formulation options and dispensing possibilities, while also helping simplify your ingredient portfolio by eliminating the need for solvents and additional hydrotropes in your finished formulation.

Deriphat® 160 C is an amphoteric surfactant for cleaners sold as a 30% liquid with very good foaming power in both hard and soft water. It is stable over a broad pH range, allowing it to be used in both acidic and alkaline formulations. DERIPHAT® 160 C can be combined with cationic surfactants, which are often used as bactericides for disinfectants. Additionally, it is a strong hydrotrope with excellent water solubility over a broad pH range, even when high electrolyte concentrations are present. DERIPHAT® 160 C is also compatible with other common nonionic, anionic and cationic surfactants, although it is insoluble in water in the pH range of 2.4 to 4.2. It is also listed on the EPA’s Safer Chemical Ingredients List.

Pluronic® 25R2 is a 100% active product suitable for use in low-temperature commercial dishwashing machines. It provides good defoaming and wetting properties and is heavily used in the industry as a rinse aid for low-temperature commercial dish machines. It is also suitable for machine floor cleaning as a foam controlling agent.

Pluronic® L 61 is a 100% active product and suitable for low-temperature commercial dishwashing machines. It is a low-foaming surfactant that provides good defoaming and wetting. In addition to its use in dishwashing machines, it is also suitable for machine floor cleaning as a foam controlling agent.

Sokalan® CP 7 is a copolymer of methacrylic acid and acrylic acid. Polymeric dispersing agents have the potential to inhibit incrustation and scale formation due to their ability to disperse suspended solids. Furthermore, Sokalan® CP 7 boosts detergent properties, thereby overcoming deficiencies seen when phosphates are removed from formulations.

Lutensol® CS 6250 is a clear, colorless liquid with 100% activity that is a good solubilizer, penetrating agent, and low-foaming agent. It acts as a co-solvent or co-surfactant with a cloud point greater than 100 °C. It is a petroleum-based, non-ionic surfactant, and Lutensol® AO 7 is the main component in this category.

Lutensol® XL 40 is available as a 100% active product and is suitable for machine floor cleaning as a foam controlling and degreasing agent. The level of residual alcohol is comparatively very low when compared to regular alcohol ethoxylates with the same degree of ethoxylation. It has a HLB value of 10.5 and is listed on the Safer Choice label. The final surfactant choice will be dependent on the formulation.

Lutensol® XP 89 is a nonionic surfactant manufactured by causing a C10-alcohol to react with ethylene oxide in stoichiometric proportions. It is an alkyl polyethylene glycol ether based on C10-guerbet alcohol and ethylene oxide and is a clear liquid at room temperature. The numeric code in the product name indicates the general degree of ethoxylation.

APG® 325N is a liquid product composed of alkyl polyglycosides derived from synthetic C9-C11 fatty alcohol and dissolved in water. It is a liquid product of approximately 50% concentration and has high primary cleaning, excellent gloss retention (low to no streak) and excellent plastic compatibility.

Plurafac® SLF 180 is a low-foaming surfactant with a cloud point of 18°C and is listed on EPA’s Safer Chemical Ingredients List. It is suitable for low temperature cleaning (45°C or lower) and has very good synergy with Pluronic N3, especially when used as a rinse aid in low temperature warewash machines. Final surfactant choice will be formulation dependent.

Sokalan® CP 5 is a polymeric dispersing agent that has the potential to inhibit incrustation and scale formation. This is due to its ability to disperse suspended solids, which boosts detergent efficacy and overcomes deficiencies seen when phosphates are removed from formulations.

Propionic acid is a water-soluble organic acid serving a range of applications. Propionic Acid Pure is used as a versatile preservative in food or feed industry. For bakery products it preserves as a proprionate. In animal feed applications, propionic acid preserves compound feed, grain or corn while reducing mold or yeast. In silage applications it improves fermentation. It also serves as a synthetic building block to produce pharmaceuticals, crop protection agents and solvents, as well as thermoplastics.

Lutensol® A 65 N is a liquid product with a concentration of 100%, or Lutensol® TO 89 in a 90% solution. The hydrophobe is based on saturated iso-C13 alcohol with moderate branching and has a cloud point of 60°C. It offers excellent detergency and wetting power and is a moderate foamer. Additionally, it is highly compatible with other nonionic, cationic, and anionic surfactants.

Plurafac® RA 300 is a surfactant composed of fatty alcohol alkoxylates with a cloud point of 37°C. It is a low-foaming product and is listed on the EPA's Safer Chemical Ingredients List. It is suitable for use in a variety of applications, including bottle wash, rinse aid, and cleaning in place.

Trilon® P Liquid is a liquid product with a concentration of approximately 40%. It has a high binding capacity for iron or manganese, especially at high pH, and is an important additive for controlling rust stains in water with iron present.

Sokalan® HP 30 Booster is a multifunctional, alkoxylated polyethylene imine for the detergents and cleaners industry. It can be formulated into highly concentrated formulations, including liquid monodoses, providing an oily/fatty stain removal boost even at low temperatures. It is easy to formulate in liquid laundry detergent and liquid unit dose packs.

Pluronic® 17R4 is a 100% active product that is ideal for use as a foam controlling agent in machine floor cleaning applications. The final choice of surfactant will depend on the specific formulation. This EO/PO-block polymer has approximately 40% EO and a cloud point of 46°C.

Lutensol® XL 50 is a 100% active product with a comparatively lower level of residual alcohol than regular alcohol ethoxylates with the same degree of ethoxylation. It is suitable for use as a foam control and degreasing agent in machine floor cleaning.

Sokalan® HP 56 K is a copolymer of vinylpyrrolidone and vinylimidazole that is available in both liquid (approximately 30% concentration) and granular (minimum 95% concentration). It offers significantly better performance compared to PVP, thanks to the additional functionality provided by vinylimidazole.

Sokalan® CP 5 Granules are available as granules with a concentration of approximately 92%. It has a high charge density and is ideal for powdered detergents. Its mean molar weight (Mw) is 70,000, and its calcium carbonate dispersion capacity (mg/g active polymer) is 280 at 60°C, pH 11. The residue is friable and thus will not promote re-soiling.

Sokalan® CP 9 is a hydrophobically modified polyacrylate, available as an approximately 25% solids liquid. It has the potential to inhibit incrustation and scale formation as a result of its ability to disperse suspended solids. It boosts detergent effectiveness by overcoming deficiencies seen when phosphates are removed from formulations.

Pluronic® 17R2 is a 100% active product and is suitable for use as a foam controlling agent in machine floor cleaning applications, such as in food and beverage processing, institutional cleaning, and sanitation. Its benefits include foam control, lubrication, and low foam detergency.