Products

BC 9060 is a blue colored, two-component, flowable compound that, regardless of thickness or confinement, cures at room temperature or by application heat. The cured rubber is high strength and high tear with good elongation. BC9060 is a mold-making material recommended for repetitive production of intricate shapes cast in epoxy or urethane resins. It is also used in potting of electronic components and in protecting sensitive assemblies against thermal shock and vibration.

BC 9040T is a clear, two-component, flowable compound that, regardless of thickness or confinement, cures at room temperature or by application heat. The cured rubber is high strength and high tear with good elongation. BC9040T is a mold-making material recommended for repetitive production of intricate shapes cast in epoxy or urethane resins. It is also used in potting of electronic components and in protecting sensitive assemblies against thermal shock and vibration.

BC8160 is a low viscosity two-component urethane casting compound that is specifically formulated for its flexural and impact strength. It is recommended for use for the production casting of highly wear-resistant parts and prototypes. BC8160 can be used to develop thermoplastics type prototypes. This product is a safe, easy-to-handle, room temperature mixing and curing system that does not contain TDI, MDI, or MOCA. BC8160 is relatively insensitive to typical environmental moisture and will make good void-free parts without the problems that some conventional urethane systems exhibit.

BC 9020 is a violet colored, two-component, flowable compound that, regardless of thickness or confinement, cures at room temperature. The cured rubber is high strength and high tear with good elongation. In addition, BC 9020 features low viscosity, low durometer, and resistance to sulfur clays. BC 9020 is a mold making material designed for the manufacture of flexible molds. These rubber molds are recommended for the use in repetitive production of intricate shapes cast from epoxy or urethane resins. These molds are also used in the potting of electronic components and in protecting sensitive assemblies against thermal shock and vibration.

BC 8675E is a multi-purpose elastomer that can perform many functions. Typical product features are: easy to use, cures at room temperature, resists moisture absorption, excellent in use for molds for casting of concrete and plaster, does not contain MOCA, MDA, TDI or MDI. Product uses include: mold fabrication, shock absorbent pads and liners, excellent as an adhesive for high strength and resilient bonds, electrical potting and cable sealing applications, various types of urethane rubber parts.

BC 8782 produces a high impact rigid 82 Shore D material that is commonly used to make clear or tinted castings of all kinds. When used at room temperature castings 1/8 " thick or larger can readily be cast. Castings that are less than 1/8 " thick generally require a mild post-cure.

DP-11-83 is a low viscosity, quick setting, easy to use adhesive and/or casting material. This product was designed to bond together the MB1200 foam board to create desired dimensions in length, width and height. DP-11-83 has a working life of up to 13 minutes for casting applications. If used as an adhesive, it is workable for up to 16 minutes.