Products

BC 9060 is a blue colored, two-component, flowable compound that, regardless of thickness or confinement, cures at room temperature or by application heat. The cured rubber is high strength and high tear with good elongation. BC9060 is a mold-making material recommended for repetitive production of intricate shapes cast in epoxy or urethane resins. It is also used in potting of electronic components and in protecting sensitive assemblies against thermal shock and vibration.

BC 9040T is a clear, two-component, flowable compound that, regardless of thickness or confinement, cures at room temperature or by application heat. The cured rubber is high strength and high tear with good elongation. BC9040T is a mold-making material recommended for repetitive production of intricate shapes cast in epoxy or urethane resins. It is also used in potting of electronic components and in protecting sensitive assemblies against thermal shock and vibration.

BC8160 is a low viscosity two-component urethane casting compound that is specifically formulated for its flexural and impact strength. It is recommended for use for the production casting of highly wear-resistant parts and prototypes. BC8160 can be used to develop thermoplastics type prototypes. This product is a safe, easy-to-handle, room temperature mixing and curing system that does not contain TDI, MDI, or MOCA. BC8160 is relatively insensitive to typical environmental moisture and will make good void-free parts without the problems that some conventional urethane systems exhibit.

BC 9020 is a violet colored, two-component, flowable compound that, regardless of thickness or confinement, cures at room temperature. The cured rubber is high strength and high tear with good elongation. In addition, BC 9020 features low viscosity, low durometer, and resistance to sulfur clays. BC 9020 is a mold making material designed for the manufacture of flexible molds. These rubber molds are recommended for the use in repetitive production of intricate shapes cast from epoxy or urethane resins. These molds are also used in the potting of electronic components and in protecting sensitive assemblies against thermal shock and vibration.

BC 8782 produces a high impact rigid 82 Shore D material that is commonly used to make clear or tinted castings of all kinds. When used at room temperature castings 1/8 " thick or larger can readily be cast. Castings that are less than 1/8 " thick generally require a mild post-cure.