Knowde Enhanced TDS
Identification & Functionality
- Fluids & Lubricants Functions
- CAS No.
- 2648350-43-8
- Technologies
Features & Benefits
- Labeling Claims
- Fluids & Lubricants Features
- Environmental Benefits
- High biodegradability
- Low bioaccumulation
- Low toxicity
- High bio-content
- Rapid breakdown
- Low environmental risk
- Reduced risk to wildlife
- Renewable carbon based
Applications & Uses
- Applications
- Fluids & Lubricants Type
- Fluids & Lubricants End Use
- Applications
- Cold tempertature applications
- Motor oil
- Hydraulic fluid
- Compressor oil
Properties
- ISO Viscosity Grade
- Physical Form
- Physical Properties
- Environmental Properties
- Performance Properties
- Note
*Typical results are provided. To the best of our knowledge, the information is accurate, but given without guarantee. All results are for an unadditized base oil.
Value | Units | Test Method / Conditions | |
Bio Based | 99 | — | ASTM D6866 |
Viscosity Index | 185 | — | D2270 |
Biodegradable | 84 | % | OECD 301B |
Pour Point | -42 | °C | D97 |
Flash Point | 290 | °C | D92 |
Total Acid Number | 0.2 | mg KOH/g | D664 |
Color | 5 | — | D1544 |
Water | 0.1 max | wt% | D6304 |
Kinematic Viscosity (at 100°C) | 22.4 | cSt | D445 |
Kinematic Viscosity (at 40°C) | 143.9 | cSt | D445 |
Low Viscosity | 150 | % | ISO VG |
Specific Gravity (at 15°C) | 0.92 - 0.94 | — | D4052 |
Value | Units | Test Method / Conditions | |
Biodegradability | 84 | % | OECD 301B |
Renewable Carbon Content | 99 | % | ASTM D6866 |
EcoToxicity | min. 1000 | mg/l | OECD 201 |
EcoToxicity | min. 1000 | mg/l | OECD 202 |
EcoToxicity | min. 1000 | mg/l | OECD 203 |
Value | Units | Test Method / Conditions | |
4-Ball Wear | 0.75 | mm | ASTM D4172 |
Hydrolytic Stability Total Acidity Water Layer | 0.1 | g KOH/g | ASTM D2619 |
Load-Wear Index | 35.1 | kgf | ASTM D2783 |
Weld Load | 200 | kgf | ASTM D2783 |
Regulatory & Compliance
Technical Details & Test Data
- Technical Performance
Low volatility
- High viscosity index
- Great hydrolytic stability
- Natural detergency
- Longer lasting
- Increased safety
- Fewer additives needed
- Less maintenance
- Low pour point