Products

Cylcon 666 is designed to counter the problems associated with deposition and dusting in the dryer section. It is typically applied continuously via a spray bar onto the drying cylinder or fabric.

Dispelair® CF 937 is a foam control agent for concentrate and tank side addition in metal working fluids.

Dispelair® CF 898 is a foam control agent for decorative emulsion paints. It has good cost performance and dispersibility.

Dispelair® CF 407 is a foam control agent for inks and decorative emulsion paints. It is very effective in all interior paints and has good dispersibility.

Dispelair® DP 510 has been developed for paper and paper board systems which contain low levels of additives; for example, wet strength and dry strength polymers. Such systems are typically characterized by increased levels of surface foam. This system combines the excellent air removal properties of standard deaerators but with enhanced surface foam control.

Dispelair® DP 710 has been developed for paper and paper board systems which contain low levels of additives; for example, wet strength and dry strength polymers. Such systems are typically characterized by increased levels of surface foam. This system combines the excellent air removal properties of standard deaerators but with enhanced surface foam control.

Dispelair® DP 763 has been developed for paper and paper board systems which contain low levels of additives; for example, wet strength and dry strength polymers. Such systems are typically characterized by increased levels of surface foam. This system combines the excellent air removal properties of standard deaerators but with enhanced surface foam control.

Dispelair® DP 592 has been developed for paper and paper board systems which contain low levels of additives; for example, wet strength and dry strength polymers. Such systems are typically characterized by increased levels of surface foam. This system combines the excellent air removal properties of standard deaerators but with enhanced surface foam control.

Dispelair® CF 421 is a foam control agent for inks and decorative emulsion paints. It has high dispersibility for low PVC systems.

Dispelair® DP 336 has been developed for paper and paper board systems which contain low levels of additives; for example, wet strength and dry strength polymers. Such systems are typically characterized by increased levels of surface foam. This system combines the excellent air removal properties of standard deaerators but with enhanced surface foam control.

Dispelair® DP 762 has been developed for paper and paper board systems which contain low levels of additives; for example, wet strength and dry strength polymers. Such systems are typically characterized by increased levels of surface foam. This system combines the excellent air removal properties of standard deaerators but with enhanced surface foam control.

Cylcon 333 is designed to counter the problems associated with deposition and dusting in the dryer section. It is typically applied continuously via a spray bar onto the drying cylinder or fabric.

Dispelair® DP 792 has been developed for paper and paper board systems which contain low levels of additives; for example, wet strength and dry strength polymers. Such systems are typically characterized by increased levels of surface foam. This system combines the excellent air removal properties of standard deaerators but with enhanced surface foam control.

Dispelair® DP 364 has been developed for paper and paper board systems which contain low levels of additives; for example, wet strength and dry strength polymers. Such systems are typically characterized by increased levels of surface foam. This system combines the excellent air removal properties of standard deaerators but with enhanced surface foam control.

Dispelair® DP 356 has been developed for paper and paper board systems which contain low levels of additives; for example, wet strength and dry strength polymers. Such systems are typically characterized by increased levels of surface foam. This system combines the excellent air removal properties of standard deaerators but with enhanced surface foam control.

Dispelair® DP 131 is a hybrid deaerator for wet end paper and paper board production. Effective deaeration can lead to process benefits which include increases in production, drainage and improved web strength. It assists in the clean running of the paper machine and do not contribute to pitch accumulation.

Dispelair® CF 750 is a foam control agent for concentrate and tank side addition in metal working fluids.

Dispelair® CF 698 is a foam control agent for inks. It has high dispersibility and works excellent in clear systems.

Dispelair® BS 756 is an antifoam used while drilling muds during the oil process in the Petroleum Industry. It can act quickly, is cost effective and can be supplied as emulsions or compounds.

Dispelair® DP 594 has been developed for paper and paper board systems which contain low levels of additives; for example, wet strength and dry strength polymers. Such systems are typically characterized by increased levels of surface foam. This system combines the excellent air removal properties of standard deaerators but with enhanced surface foam control.

Dispelair® CF 37 is an antifoam used while drilling muds during the oil process in the Petroleum Industry. It can act quickly, is cost effective and can be supplied as emulsions or compounds.

Dispelair® DP 131 is a deaerator for wet end paper and paper board production. Effective deaeration can lead to process benefits which include increases in production, drainage and improved web strength. It assists in the clean running of the paper machine and do not contribute to pitch accumulation.

Dispelair® CF 49 is a foam control agents for inks. It has high dispersibility & excellent compatibility.

Dispelair® CF 643 is a foam control agent for concentrate and tank side addition in metal working fluids.

Dispelair® CF 507 is a general purpose, high dispersibility foam control agent for aqueous adhesives.

Dispelair® CF 345 is a foam control agent for inks and decorative emulsion paints. It is highly effective for very foamy systems.

Dispelair® CF 904 is a foam control agent for aqueous adhesives. It is very effective in PVA & starch-based adhesives and has high regulatory compliance.

Cylcon 111 is designed to counter the problems associated with deposition and dusting in the dryer section. It is typically applied continuously via a spray bar onto the drying cylinder or fabric.

Dispelair® DP 231 has been developed for paper and paper board systems which contain low levels of additives; for example, wet strength and dry strength polymers. Such systems are typically characterized by increased levels of surface foam. This system combines the excellent air removal properties of standard deaerators but with enhanced surface foam control.

Cylcon 222 is designed to counter the problems associated with deposition and dusting in the dryer section. It is typically applied continuously via a spray bar onto the drying cylinder or fabric.

Dispelair® DP 131 is a hybrid deaerator for wet end paper and paper board production. Effective deaeration can lead to process benefits which include increases in production, drainage and improved web strength. It assists in the clean running of the paper machine and do not contribute to pitch accumulation.

Dispelair® DP 636 has been developed for paper and paper board systems which contain low levels of additives; for example, wet strength and dry strength polymers. Such systems are typically characterized by increased levels of surface foam. This system combines the excellent air removal properties of standard deaerators but with enhanced surface foam control.

Dispelair® DP 790 has been developed for paper and paper board systems which contain low levels of additives; for example, wet strength and dry strength polymers. Such systems are typically characterized by increased levels of surface foam. This system combines the excellent air removal properties of standard deaerators but with enhanced surface foam control.

Dispelair® CF 236 is a foam control agent for concentrate and tank side addition in metal working fluids.

Dispelair® DP 351 has been developed for paper and paper board systems which contain low levels of additives; for example, wet strength and dry strength polymers. Such systems are typically characterized by increased levels of surface foam. This system combines the excellent air removal properties of standard deaerators but with enhanced surface foam control.