Products

Dispelair® DP 793 has been developed for paper and paper board systems which contain low levels of additives; for example, wet strength and dry strength polymers. Such systems are typically characterized by increased levels of surface foam. This system combines the excellent air removal properties of standard deaerators but with enhanced surface foam control.

Dispelair® DP 536 has been developed for paper and paper board systems which contain low levels of additives; for example, wet strength and dry strength polymers. Such systems are typically characterized by increased levels of surface foam. This system combines the excellent air removal properties of standard deaerators but with enhanced surface foam control.

Dispelair® DP 636 has been developed for paper and paper board systems which contain low levels of additives; for example, wet strength and dry strength polymers. Such systems are typically characterized by increased levels of surface foam. This system combines the excellent air removal properties of standard deaerators but with enhanced surface foam control.

Dispelair® BS 756 is an antifoam used while drilling muds during the oil process in the Petroleum Industry. It can act quickly, is cost effective and can be supplied as emulsions or compounds.

Dispelair® DP 959 for the wet end is designed to work as effective deaerators in the paper & board manufacturing process. The appropriate product choice is largely determined by the temperature, chemical nature of the furnish and regulatory requirements. Effective deaeration can lead to process benefits which include increases in production, drainage and improved web strength. The product assists in the clean running of the paper machine and does not contribute to pitch accumulation.

Cylcon 111 is designed to counter the problems associated with deposition and dusting in the dryer section. It is typically applied continuously via a spray bar onto the drying cylinder or fabric.

Dispelair® DP 594 has been developed for paper and paper board systems which contain low levels of additives; for example, wet strength and dry strength polymers. Such systems are typically characterized by increased levels of surface foam. This system combines the excellent air removal properties of standard deaerators but with enhanced surface foam control.

Dispelair® BS 25 is a silicone emulsion defoamer and consists of highly effective processing aids that remove foam in production and during the washing stages of the pulping process. Typically, the foam control agent is added during the screening and washing of brown stock.

Dispelair® DP 336 has been developed for paper and paper board systems which contain low levels of additives; for example, wet strength and dry strength polymers. Such systems are typically characterized by increased levels of surface foam. This system combines the excellent air removal properties of standard deaerators but with enhanced surface foam control.

Dispelair® BS 925 is a silicone emulsion defoamer and consists of highly effective processing aids that remove foam in production and during the washing stages of the pulping process. Typically, the foam control agent is added during the screening and washing of brown stock.

Dispelair® DP 762 has been developed for paper and paper board systems which contain low levels of additives; for example, wet strength and dry strength polymers. Such systems are typically characterized by increased levels of surface foam. This system combines the excellent air removal properties of standard deaerators but with enhanced surface foam control.

Dispelair® DP 592 has been developed for paper and paper board systems which contain low levels of additives; for example, wet strength and dry strength polymers. Such systems are typically characterized by increased levels of surface foam. This system combines the excellent air removal properties of standard deaerators but with enhanced surface foam control.

Dispelair® DP 836 has been developed for paper and paper board systems which contain low levels of additives; for example, wet strength and dry strength polymers. Such systems are typically characterized by increased levels of surface foam. This system combines the excellent air removal properties of standard deaerators but with enhanced surface foam control.

Dispelair® DP 510 has been developed for paper and paper board systems which contain low levels of additives; for example, wet strength and dry strength polymers. Such systems are typically characterized by increased levels of surface foam. This system combines the excellent air removal properties of standard deaerators but with enhanced surface foam control.

Dispelair® DP 356 has been developed for paper and paper board systems which contain low levels of additives; for example, wet strength and dry strength polymers. Such systems are typically characterized by increased levels of surface foam. This system combines the excellent air removal properties of standard deaerators but with enhanced surface foam control.

Dispelair® DP 600 has been developed for paper and paper board systems which contain low levels of additives; for example, wet strength and dry strength polymers. Such systems are typically characterized by increased levels of surface foam. This system combines the excellent air removal properties of standard deaerators but with enhanced surface foam control.

Cylcon 666 is designed to counter the problems associated with deposition and dusting in the dryer section. It is typically applied continuously via a spray bar onto the drying cylinder or fabric.

Dispelair® BS 63 is a pulp silicone free defoamer which has been developed for sensitive systems where pulp cleanliness is paramount and the pulp must remain free of any silicone contamination.

Dispelair® DP 139 defoamers for wet end paper, paper board production, waste water treatment and recycling.

Dispelair® DP 710 has been developed for paper and paper board systems which contain low levels of additives; for example, wet strength and dry strength polymers. Such systems are typically characterized by increased levels of surface foam. This system combines the excellent air removal properties of standard deaerators but with enhanced surface foam control.

Dispelair® P 893 is a highly effective foam control for the construction industry particularly where high compressive strength is required.

Dispelair® DP 790 has been developed for paper and paper board systems which contain low levels of additives; for example, wet strength and dry strength polymers. Such systems are typically characterized by increased levels of surface foam. This system combines the excellent air removal properties of standard deaerators but with enhanced surface foam control.

Dispelair® CF 54 is a foam control agent that has been specifically designed to work in a wide range of low to high PVC paints as well as inks and adhesives. It is also highly effective in paper coatings. Dispelair CF 54 is made from 90% renewable sources. It has a high dispersibility and has 100% active content.

Dispelair® DP 906 for the wet end is designed to work as effective deaerators in the paper & board manufacturing process. The appropriate product choice is largely determined by the temperature, chemical nature of the furnish and regulatory requirements. Effective deaeration can lead to process benefits which include increases in production, drainage and improved web strength. The product assists in the clean running of the paper machine and does not contribute to pitch accumulation.

Dispelair® DP 848 for the wet end is designed to work as effective deaerators in the paper & board manufacturing process. The appropriate product choice is largely determined by the temperature, chemical nature of the furnish and regulatory requirements. Effective deaeration can lead to process benefits which include increases in production, drainage and improved web strength. The product assists in the clean running of the paper machine and does not contribute to pitch accumulation.

Dispelair® DP 364 has been developed for paper and paper board systems which contain low levels of additives; for example, wet strength and dry strength polymers. Such systems are typically characterized by increased levels of surface foam. This system combines the excellent air removal properties of standard deaerators but with enhanced surface foam control.

Dispelair® BS 775 is a silicone emulsion defoamer and consists of highly effective processing aids that remove foam in production and during the washing stages of the pulping process. Typically, the foam control agent is added during the screening and washing of brown stock.

Dispelair® DP 151 has been developed for paper and paper board systems which contain low levels of additives; for example, wet strength and dry strength polymers. Such systems are typically characterized by increased levels of surface foam. This system combines the excellent air removal properties of standard deaerators but with enhanced surface foam control.

Dispelair® DP 711 has been developed for paper and paper board systems which contain low levels of additives; for example, wet strength and dry strength polymers. Such systems are typically characterized by increased levels of surface foam. This system combines the excellent air removal properties of standard deaerators but with enhanced surface foam control.

Dispelair® DP 948 for the wet end is designed to work as effective deaerators in the paper & board manufacturing process. The appropriate product choice is largely determined by the temperature, chemical nature of the furnish and regulatory requirements. Effective deaeration can lead to process benefits which include increases in production, drainage and improved web strength. The product assists in the clean running of the paper machine and does not contribute to pitch accumulation.

Dispelair® CF 707 is a polyglycol based foam control agent. It is a high-performance product that can be used in all types of PCEs and in systems where compatibility and clarity are not critical. This foam control agent contains 95% actives in solvent.