Products

Dispelair® DP 793 has been developed for paper and paper board systems which contain low levels of additives; for example, wet strength and dry strength polymers. Such systems are typically characterized by increased levels of surface foam. This system combines the excellent air removal properties of standard deaerators but with enhanced surface foam control.

Dispelair® DP 536 has been developed for paper and paper board systems which contain low levels of additives; for example, wet strength and dry strength polymers. Such systems are typically characterized by increased levels of surface foam. This system combines the excellent air removal properties of standard deaerators but with enhanced surface foam control.

Dispelair® DP 636 has been developed for paper and paper board systems which contain low levels of additives; for example, wet strength and dry strength polymers. Such systems are typically characterized by increased levels of surface foam. This system combines the excellent air removal properties of standard deaerators but with enhanced surface foam control.

Dispelair® BS 756 is an antifoam used while drilling muds during the oil process in the Petroleum Industry. It can act quickly, is cost effective and can be supplied as emulsions or compounds.

Dispelair® DP 959 for the wet end is designed to work as effective deaerators in the paper & board manufacturing process. The appropriate product choice is largely determined by the temperature, chemical nature of the furnish and regulatory requirements. Effective deaeration can lead to process benefits which include increases in production, drainage and improved web strength. The product assists in the clean running of the paper machine and does not contribute to pitch accumulation.

Cylcon 111 is designed to counter the problems associated with deposition and dusting in the dryer section. It is typically applied continuously via a spray bar onto the drying cylinder or fabric.

Dispelair® DP 594 has been developed for paper and paper board systems which contain low levels of additives; for example, wet strength and dry strength polymers. Such systems are typically characterized by increased levels of surface foam. This system combines the excellent air removal properties of standard deaerators but with enhanced surface foam control.

Dispelair® BS 25 is a silicone emulsion defoamer and consists of highly effective processing aids that remove foam in production and during the washing stages of the pulping process. Typically, the foam control agent is added during the screening and washing of brown stock.

Dispelair® DP 336 has been developed for paper and paper board systems which contain low levels of additives; for example, wet strength and dry strength polymers. Such systems are typically characterized by increased levels of surface foam. This system combines the excellent air removal properties of standard deaerators but with enhanced surface foam control.

Dispelair® BS 925 is a silicone emulsion defoamer and consists of highly effective processing aids that remove foam in production and during the washing stages of the pulping process. Typically, the foam control agent is added during the screening and washing of brown stock.

Dispelair® SOFTIS TS 20 is designed to combat foam generated in the jet dyeing processes at high temperatures and pressures. This wetting agent is designed to ensure even dyeing of the textile fabric.

Dispelair® DP 762 has been developed for paper and paper board systems which contain low levels of additives; for example, wet strength and dry strength polymers. Such systems are typically characterized by increased levels of surface foam. This system combines the excellent air removal properties of standard deaerators but with enhanced surface foam control.

Dispelair® CF 219 is a highly effective foam control agent for aqueous adhesives and for very foamy systems.

Dispelair® CF 128 is a foam control agent for aqueous adhesives. It has good dispersibility and high regulatory compliance.

Dispelair® Cyltac 415 is a base coat product to protect the yankee cylinder, release oils to control adhesion and modifiers to alter the properties of the base coat.

Dispelair® DP 592 has been developed for paper and paper board systems which contain low levels of additives; for example, wet strength and dry strength polymers. Such systems are typically characterized by increased levels of surface foam. This system combines the excellent air removal properties of standard deaerators but with enhanced surface foam control.

Dispelair® DP 836 has been developed for paper and paper board systems which contain low levels of additives; for example, wet strength and dry strength polymers. Such systems are typically characterized by increased levels of surface foam. This system combines the excellent air removal properties of standard deaerators but with enhanced surface foam control.

Dispelair® DP 510 has been developed for paper and paper board systems which contain low levels of additives; for example, wet strength and dry strength polymers. Such systems are typically characterized by increased levels of surface foam. This system combines the excellent air removal properties of standard deaerators but with enhanced surface foam control.

Dispelair® DP 356 has been developed for paper and paper board systems which contain low levels of additives; for example, wet strength and dry strength polymers. Such systems are typically characterized by increased levels of surface foam. This system combines the excellent air removal properties of standard deaerators but with enhanced surface foam control.

Dispelair® DP 600 has been developed for paper and paper board systems which contain low levels of additives; for example, wet strength and dry strength polymers. Such systems are typically characterized by increased levels of surface foam. This system combines the excellent air removal properties of standard deaerators but with enhanced surface foam control.

Cylcon 666 is designed to counter the problems associated with deposition and dusting in the dryer section. It is typically applied continuously via a spray bar onto the drying cylinder or fabric.

Dispelair® BS 63 is a pulp silicone free defoamer which has been developed for sensitive systems where pulp cleanliness is paramount and the pulp must remain free of any silicone contamination.

Dispelair® CF 147 is a foam control agent for aqueous adhesives. It has high dispersibility & excellent compatibility.

Dispelair® P 430 is used as a foam control for the construction industry. It is effective in many applications at low concentrations.

Dispelair® DP 139 defoamers for wet end paper, paper board production, waste water treatment and recycling.

Dispelair® CF 395 is a polyglycol based foam control agent. It is suitable for use in all types of PCES, highly effective in HPEG, MPEG and VPEG PCE production and are particularly effective when high compatibility and clarity are required within the PCE.

Dispelair® SE 101F is used to control the foam produced in the washing and processing of vegetables. This foam is stabilized by the sugars and starches present in the process water.

Dispelair® DP 710 has been developed for paper and paper board systems which contain low levels of additives; for example, wet strength and dry strength polymers. Such systems are typically characterized by increased levels of surface foam. This system combines the excellent air removal properties of standard deaerators but with enhanced surface foam control.

Dispelair® P 893 is a highly effective foam control for the construction industry particularly where high compressive strength is required.