Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- CASE Ingredients Functions
- Technologies
- Product Families
Features & Benefits
- CASE Ingredients Features
- Product Highlights
- Excellent chemical resistance
- Exhibits hydrolytic stability
- Imparts toughness
- Improves adhesion
- Low cost
Applications & Uses
- Applications
- Applications
- Interior coatings
- Floor coatings
Properties
- Typical Properties
- Cured Properties
- Uncured Properties
| Value | Units | Test Method / Conditions | |
| Fluorescing | Blue | - | - |
| Rheology | Newtonian | - | - |
| Value | Units | Test Method / Conditions | |
| Durometer Hardness | D80 | - | - |
| Elongation at Break | 13.0 | % | - |
| Glass Transition Temperature (Tg) | 11.0 | °C | - |
| Modulus of Elasticity | 640 [93,000] | MPa (psi) | - |
| Nominal Viscosity | 600.0 | cP | - |
| Tensile at Break | 1200 | psi | - |
| Value | Units | Test Method / Conditions | |
| Density (25°C) | 1.1 | g/cm³ | — |
| Pt-Co Color (APHA) | 50.0 | - | - |
| Refractive Index (25°C) | 1.466 | - | - |
| Viscosity at 50°C | 15000.0 | cP | - |
| Viscosity at 60°C | 5600.0 | - | - |
Technical Details & Test Data
- Typical Formulations
Typical Formulations Test Formulation Name 130 150 TM50 TP50 H50 HE30 BR-742M 70 50 50 50 50 70 IBOA 30 50 TMPTA 50 TPGDA 50 HDDA 50 HEMA 30 Omnirad 184 2 2 2 2 2 2 Viscosity, 25°C* 6,000 700 3,800 800 300 - CURED MECHANICAL PROPERTIES Property I30 I50 TM50 TP50 H50 Tensile Strength, psi** 1,240 2,310 4,380 1,430 2,760 Elongation, %** 102.5 106 6 10.5 9.5 Elastic Modulus, ksi** 5.57 55.9 130.7 42.8 79.2 Durometer Hardness 41D 70D 85D 67D 73D MEK Double Rubs (#) 10 6 >200 54 >200 T g (DMA ) =11°C;Peak tan delta; cured with 2 phr of Omnirad™ 481 ** Per ASTM D882 Brookfield – CAP2000+ @ 25 °C
ADHESION PROPERTIES Substrate I30 I50 TM50 TP50 H50 ABS XX Acrylic X Aluminum XXX Cold Rolled Steel XX XX Glass X HDPE Polycarbonate X XX Stainless Steel X XXX XX X Recommended XX Highly Recommended XXX Strongly Recommende
- Viscosity Reduction With Reactive Diluents
Safety & Health
- General Information
This product is intended for industrial use only. Keep out of the reach of children. Avoid breathing vapors. Avoid contact with skin, eyes, and clothing. Wear impervious gloves. Repeated or continuous skin contact with uncured material may cause irritation. Remove material from skin with soap and water. Never use organic solvents to remove material from skin and eyes. For more information on the safe handling of this material, please refer to the Safety Data Sheet before use.