Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- CASE Ingredients Functions
- Technologies
- Product Families
Features & Benefits
- CASE Ingredients Features
- Features
- A more flexible, lower modulus, lower viscosity alternative to BR-541MB
- Fast soak-off for nail gel applications
- Low color
- Low MeHQ content
- High gloss
Properties
- Typical Properties
- Cured Properties
- Uncured Properties
Value | Units | Test Method / Conditions | |
Fluorescing | No | - | - |
Rheology | Newtonian | - | - |
Value | Units | Test Method / Conditions | |
Durometer Hardness | D55 | - | - |
Elongation at Break | 230.0 | % | - |
Glass Transition Temperature (Tg) | 53.0 | °C | - |
Modulus of Elasticity | 100 [15,000] | MPa (psi) | - |
Nominal Viscosity | 200.0 | cP | - |
Tensile at Break | 1300 | psi | - |
Value | Units | Test Method / Conditions | |
Density (25°C) | 1.05 | g/cm³ | — |
Pt-Co Color (APHA) | max. 50 | - | - |
Refractive Index (25°C) | 1.48 | - | - |
Viscosity | 65000.0 | cP (at 20 rpm) | - |
Viscosity at 25°C | 65000.0 | cP | - |
Technical Details & Test Data
- Typical Formulations
TYPICAL FORMULATIONS Test FormulationName I30 I50 TM50 TP50 H50 HE30 BR-551M 70 50 50 50 50 70 IBOA 30 50 TMPTA 50 TPGDA 50 HDDA 50 HEMA 30 Irgacure ® 184 2 2 2 2 2 2 Viscosity, 25°C * 5,100 900 3,800 1,000 400 2,300 * Brookfield – CAP 2000+ @ 25°C CURED MECHANICAL PROPERTIES Property I30 I50 TM50 TP50 H50 HE30 Tensile Strength, psi** 1300 2000 2900 1400 1600 950 Elongation, %** 74 98 3 9 5 70 Elastic Modulus, ksi** 22 64 138 55 63 24 Durometer Hardness 55D 66D 84D 63D 69D 53D Water Absorption, % (24 hrs) 0.4 0.23 0.48 0.54 0.4 1.98 MEK Double Rubs (#) 18 17 98 16 147 14 T g (DMA ) =53°C;Peak tan delta; cured with 2 phr of Irgacure® 1 84 Brookfield – CAP 2000+ @ 25°C
** Per ASTM D882
ADHESION PROPERTIES
Substrate I30 I50 TM50 TP50 H50 HE30 Aluminum X Cold Rolled Steel XX Glass X X HDPEPET XX X XX X XXX PMMA X XXX X X Polycarbonate XX XXX XX XXX XXX Stainless Steel XX X Recommended XX Highly Recommended XXX Strongly Recommended
- Viscosity Reduction With Reactive Diluents
- Viscosity Reduction with Reactive Diluents
This product is intended for industrial use only. Keep out of the reach of children. Avoid breathing vapors. Avoid contact with skin, eyes, and clothing. Wear impervious gloves. Repeated or continuous skin contact with uncured material may cause irritation. Remove material from skin with soap and water. Never use organic solvents to remove material from skin and eyes. For more information on the safe handling of this material, please refer to the Safety Data Sheet before use.