Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- CASE Ingredients Functions
- Technologies
- Product Families
Features & Benefits
- CASE Ingredients Features
- Product Highlights
- Provides toughness
- Solvent resistance
- Exceptionally low color
- Imparts hardness
- Exhibits hydrolytic stability
- Improves Weatherability
- Gloss Finish
Applications & Uses
- Markets
- Compatible Substrates & Surfaces
- Applications
- Coatings for wood
- Pigmented coatings
- Rigid plastic topcoats
Properties
- Typical Properties
- Cured Properties
- Uncured Properties
Value | Units | Test Method / Conditions | |
Fluorescing | No | - | - |
Rheology | Newtonian | - | - |
Value | Units | Test Method / Conditions | |
Durometer Hardness | A65 | - | - |
Elongation at Break | 270.0 | % | - |
Glass Transition Temperature (Tg) | 37.0 | °C | - |
Modulus of Elasticity | 3 [370] | MPa (psi) | - |
Nominal Viscosity | 12000.0 | cP | - |
Tensile at Break | 3400 | psi | - |
Value | Units | Test Method / Conditions | |
Density (25°C) | 1.08 | g/cm³ | — |
Pt-Co Color (APHA) | 10.0 | - | - |
Refractive Index (25°C) | 1.493 | - | - |
Viscosity at 50°C | 100000.0 | cP | - |
Viscosity at 60°C | 31000.0 | - | - |
Technical Details & Test Data
- Typical Formulations
Adhesion Properties Substrate I30 I50 TM50 TP50 H50 HE30 ABS X XXX XX XX Aluminum X Cold Rolled Steel
Glass X X HDPE PET XXX XXX XXX XXX XXX PMMA XXX XX Polycarbonate X XX XXX XX XXX Polypropylene PVC XX XXX XXX XX XXX X Stainless Steel X X Recommended XX Highly Recommended XXX Strongly Recommended
Typical Formulations Test Formulation Name 130 150 TM50 TP50 H50 HE30 BR-742M 70 50 50 50 50 70 IBOA 30 50 TMPTA 50 TPGDA 50 HDDA 50 HEMA 30 Omnirad 184 2 2 2 2 2 2 Viscosity, 25°C* 34,000 3,000 15,000 2,800 1,000 9,800 * Brookfield – CAP 2000+ @ 25°C.
Cured Mechanical Properties Property I30 I50 TM50 TP50 H50 HE30 Tensile Strength, psi**
3,400 2,800 4,600 2,400 2,800 2,300 Elongation, 6** 75 40 3 11 6 80 Elastic Modulus, ksi*
45 140 170 70 90 20 Durometer Hardness
64D 75D 800 68D 71D 60D Water Absorption, 96 (24 hrs)
1 0.35 1 1 1 3 MEK Double Rubs (#)
75 25 >200 92 130 23 Tg(DMA)=63°C; Peak tan delta; cured with 2 phr of Omnirad® 184
** Per ASTM D882 – Not Tested || Incompatible X Unable to Measure
- Viscosity Reduction With Reactive Diluents
Safety & Health
- General Information
This product is intended for industrial use only. Keep out of the reach of children. Avoid breathing vapors. Avoid contact with skin, eyes, and clothing. Wear impervious gloves. Repeated or continuous skin contact with uncured material may cause irritation. Remove material from skin with soap and water. Never use organic solvents to remove material from skin and eyes. For more information on the safe handling of this material, please refer to the Safety Data Sheet before use.