Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- CASE Ingredients Functions
- Technologies
- Product Families
Features & Benefits
- CASE Ingredients Features
- Features
- Low color
- Good balance of toughness and flexibility
- Oil and chemical resistance
- Impacts excellent toughness
- Multifunctional for improved cure speed
- Adhesion to plastics
Applications & Uses
- Compatible Substrates & Surfaces
- Applications
- Weather-resistant outdoor coatings
- Optical adhesives
- Flexible packaging films
- Plastic coatings
Properties
- Cured Properties
- Uncured Properties
| Value | Units | Test Method / Conditions | |
| Nominal Viscosity | 7.5 | cP | - |
| Value | Units | Test Method / Conditions | |
| Density (25°C) | 1.03 | g/cm3 | — |
| Refractive Index (at 25°C) | 1.49 | — | — |
| Viscosity (at 60°C) | 3000 | cP | — |
Technical Details & Test Data
- Test Data
Cured Mechanical Properties
Property I30 I50 TM50 TP50 H50 HE30 Tensile Strength, psi**
3,300 3,600 6,400 2,800 3,800 900 Elongation, 6** 130 110 4 14 7 110 Elastic Modulus, ksi*
50 160 220 110 120 5 Durometer Hardness
65D 79D 86D 75D 78D 45D Water Absorption, 96 (24 hrs)
0.35 0.2 0.52 0.47 0.35 1.58 MEK Double Rubs (#)
46 32 >200 53 >200 50 Tg(DMA)=89°C; Peak tan delta; cured with 2 phr of Omnirad® 184 ** Per ASTM D882 – Not Tested || Incompatible X Unable to Measure
Typical Formulations
Test Formulation Name 130 150 TM50 TP50 H50 HE30 BR-742M 70 50 50 50 50 70 IBOA 30 50 TMPTA 50 TPGDA 50 HDDA 50 HEMA 30 Omnirad 184 2 2 2 2 2 2 Viscosity, 25°C* 4,600 1,000 3,800 1,100 500 2,500 * Brookfield – CAP 2000+ @ 25°C.
Adhesion Properties
Substrate I30 I50 TM50 TP50 H50 HE30 ABS XXX XXX XXX X X Aluminum X XX Cold Rolled Steel
XX XX Glass X XX HDPE PET X XX PMMA XX X Polycarbonate XX XXX XXX XXX XXX Polypropylene PVC XX XX XXX X XXX Stainless Steel X XX * Recommended ** Highly Recommended *** Strongly Recommended
- Viscosity Reduction with Reactive Diluents
Safety & Health
- General Information
This product is intended for industrial use only. Keep out of the reach of children. Avoid breathing vapors. Avoid contact with skin, eyes, and clothing. Wear impervious gloves. Repeated or continuous skin contact with uncured material may cause irritation. Remove material from skin with soap and water. Never use organic solvents to remove material from skin and eyes. For more information on the safe handling of this material, please refer to the Safety Data Sheet before use.