Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- CASE Ingredients Functions
- Technologies
- Product Families
Features & Benefits
- CASE Ingredients Features
- Product Highlights
- Improves Adhesion
- Provides Weather Resistance
- Enhances Flexibility
- Gloss Finish
- Provides Impact Resistance
- Low Skin Irritation
- Non-Yellowing
- Low MEHQ Levels
Applications & Uses
- Compatible Substrates & Surfaces
- Recommended Application
- Nail Gel Coating
- Vacuum Metalized Coatings
- Plastic Coatings
- Elastomers
- UV Pressure-Sensitive Adhesives (PSAs)
Properties
- Uncured Properties
| Value | Units | Test Method / Conditions | |
| Viscosity (60 °C) | 44,500 | cP | — |
| Pt-Co Color (APHA) | max. 100 | — | — |
| Pt-Co Color | max. 100 | APHA | — |
| Refractive Index (25°C) | 1.484 | — | — |
| Density (25°C) | 1.03 | g/cm3 | — |
Technical Details & Test Data
- Typical Formulations
Adhesion Properties Substrate I30 I50 TM50 TP50 H50 HE30 ABS XXX XXX XXX XXX X Aluminum Cold Rolled Steel
X Glass X HDPE PET XX XXX XXX XX XX X PMMA XX XX X Polycarbonate XX XXX XXX XXX XXX X Polypropylene PVC XXX XXX XXX XXX XXX X Stainless Steel XX X X Recommended XX Highly Recommended XXX Strongly Recommended
Typical Formulations Test Formulation Name 130 150 TM50 TP50 H50 HE30 BR-742M 70 50 50 50 50 70 IBOA 30 50 TMPTA 50 TPGDA 50 HDDA 50 HEMA 30 Omnirad 184 2 2 2 2 2 2 Viscosity, 25°C* 23,000 2,800 16,000 2,700 1,200 7,500 * Brookfield – CAP 2000+ @ 25°C.
Cured Mechanical Properties Property I30 I50 TM50 TP50 H50 HE30 Tensile Strength, psi**
1,000 2 2,600 1,100 1,600 600 Elongation, 6** 160 170 | 3 12 6 120 Elastic Modulus, ksi*
24 45 110 25 45 27 Durometer Hardness
75A 58D 81D 59D 65D 55A Water Absorption, 96 (24 hrs)
0.44 0.37 1 0.69 0.52 4 MEK Double Rubs (#)
>200 56 >200 49 68 89 Tg(DMA)= 8°C; Peak tan delta; cured with 2 phr of Omnirad® 184 ** Per ASTM D882 – Not Tested || Incompatible X Unable to Measure
- Viscosity Reduction with Reactive Diluents
Safety & Health
- General Information
This product is intended for industrial use only. Keep out of the reach of children. Avoid breathing vapors. Avoid contact with skin, eyes, and clothing. Wear impervious gloves. Repeated or continuous skin contact with uncured material may cause irritation. Remove material from skin with soap and water. Never use organic solvents to remove material from skin and eyes. For more information on the safe handling of this material, please refer to the Safety Data Sheet before use.