Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- CASE Ingredients Functions
- Technologies
- Product Families
Features & Benefits
- CASE Ingredients Features
- Product Highlights
- Improves Adhesion
- Increases Weatherability
- Enhances Hardness
- Provides Abrasion Resistance
- Non-Yellowing
- Gloss Finish
- Low Water Absorption
- Provides Acid and Alkaline Resistance
- High Temperature Resistance
Applications & Uses
- Markets
- Compatible Polymers & Resins
- Cure Method
- Coating Type
- Recommended Application
- Coatings and Inks for Steel
- Coatings and Inks for Plastic
- Coatings and Inks for Glass
Properties
- Uncured Properties
Value | Units | Test Method / Conditions | |
Viscosity (60 °C) | 30,000 | cP | — |
Pt-Co Color (APHA) | 20 | — | — |
Pt-Co Color | 20 | APHA | — |
Refractive Index (25°C) | 1.48 | — | — |
Density (25°C) | 1.09 | g/cm3 | — |
Technical Details & Test Data
- Typical Formulations
Typical Formulations Test Formulation Name 130 150 TM50 TP50 H50 HE30 BR-742M 70 50 50 50 50 70 IBOA 30 50 TMPTA 50 TPGDA 50 HDDA 50 HEMA 30 Omnirad 184 2 2 2 2 2 2 Viscosity, 25°C* 15,000 1,700 - 1,900 800 4,200 * Brookfield – CAP 2000+ @ 25°C.
Cured Mechanical Properties
Cured Mechanical Properties Property I30 I50 TM50 TP50 H50 HE30 Tensile Strength, psi**
1,500 1,600 - 1,300 1,400 1,200 Elongation, 6** 220 95 - 14 7 180 Elastic Modulus, ksi*
0.8 9.5 - 25 30 1 Durometer Hardness
58D 72D - 70D 74D 40D Water Absorption, 96 (24 hrs)
0.3 0.2 - 0.4 0.3 2 MEK Double Rubs (#)
18 17 - 20 14 15 Tg(DMA)=153°C; Peak tan delta; cured with 2 phr of Omnirad® 184 ** Per ASTM D882 – Not Tested || Incompatible X Unable to Measure
Adhesion Properties
Substrate I30 I50 TP50 H50 HE30 ABS Aluminum XXX XXX Cold Rolled Steel XXX XXX X X Glass XXX XXX HDPE Polycarbonate XXX XXX XX XXX Stainless Steel XXX XXX X - Recommended, XX - Highly Recommended, XXX - Strongly Recommended
- Viscosity Reduction with Reactive Diluents
Safety & Health
- General Information
This product is intended for industrial use only. Keep out of the reach of children. Avoid breathing vapors. Avoid contact with skin, eyes, and clothing. Wear impervious gloves. Repeated or continuous skin contact with uncured material may cause irritation. Remove material from skin with soap and water. Never use organic solvents to remove material from skin and eyes. For more information on the safe handling of this material, please refer to the Safety Data Sheet before use.