Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- CASE Ingredients Functions
- Technologies
- Product Families
Features & Benefits
- CASE Ingredients Features
- Product Highlights
- Scratch resistant oligomer
- 100% solids
- Enhances crosslink density in waterborne formulas
- Dilutable in water
- Improves water-cleanability of UV inks and coatings
- Allows for water wash of uncured 3D printed resins
Applications & Uses
- Ink & Toner Type
- Recommended Applications
- Waterborne coatings and inks
- Water-washable UV formulations
- Antifog coatings
- Emusifier for incompatible formulations
Properties
- Cured Properties
- Uncured Properties
Value | Units | Test Method / Conditions | |
Glass Transition Temperature (Tg) | 65.0 | °C | - |
Value | Units | Test Method / Conditions | |
Density (25°C) | 1.14 | g/cm³ | — |
Pt-Co Color (APHA) | 65.0 | - | - |
Refractive Index (25°C) | 1.49 | - | - |
Viscosity | 5000.0 | cP (at 20 rpm) | - |
Viscosity at 25°C | 5000.0 | cP | - |
Technical Details & Test Data
- Typical Formulations
CURED MECHANICAL PROPERTIES Property I30 I50 TM50 TP50 H50 HE30 Tensile Strength, psi** 3,500 5,700 5,100 5,100 4,700 3,100 Elongation, %** 2.0 2.7 1.6 4.0 2.8 5.0 Elastic Modulus, ksi** 200 270 340 200 200 120 Durometer Hardness 84D 83D 92D 83D 81D 85D Water Absorption, % (24 hrs) 4.98 1.14 3.56 3.31 3.35 9.47 MEK Double Rubs (#) 55 33 >200 92 82 63 T g (DMA ) =65°C;Peak tan delta; cured with 2 phr of Irgacure® 1 84 TYPICAL FORMULATIONS Test FormulationName I30 I50 TM50 TP50 H50 HE30 XR-9416 70 50 50 50 50 70 IBOA 30 50 TMPTA 50 TPGDA 50 HDDA 50 HEMA 30 Omnirad™ 184 2 2 2 2 2 2 Viscosity, 25°C * 600 140 800 170 80 130 * Brookfield – CAP 2000+ @ 25°C. ** Per ASTM D882
ADHESION PROPERTIES Substrate I30 I50 TM50 TP50 H50 HE30 ABS ✓✓✓ ✓✓✓ ✓✓ ✓ Aluminum ✓ Cold Rolled Steel ✓ GlassHDPE ✓ ✓ PET ✓ ✓✓ ✓✓ ✓✓✓ ✓✓ ✓ PMMA ✓✓✓ ✓✓ ✓ ✓✓ Polycarbonate ✓ ✓✓✓ ✓✓ ✓✓ PVC ✓✓ ✓✓ ✓✓✓ ✓ ✓✓ ✓✓ Stainless Steel ✓ ✓✓ ✓ X Recommended XX Highly Recommended XXX Strongly Recommended
- Viscosity Reduction With Reactive Diluents
Safety & Health
- General Information
This product is intended for industrial use only. Keep out of the reach of children. Avoid breathing vapors. Avoid contact with skin, eyes, and clothing. Wear impervious gloves. Repeated or continuous skin contact with uncured material may cause irritation. Remove material from skin with soap and water. Never use organic solvents to remove material from skin and eyes. For more information on the safe handling of this material, please refer to the Safety Data Sheet before use.