Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- CASE Ingredients Functions
- Technologies
- Product Families
Features & Benefits
- CASE Ingredients Features
- Features
- Excellent hydrophobicity in the polymer backbone
- Can be formulated to yield fast dry times
- Dries to a tack-free film
- Polymer is flexible without plasticizers
- Inherent toughness improves chip resistance
- Reactive to cure with sunlight exposure
- Can be formulated to develop a high gloss finish
Applications & Uses
- Applications
- Cure Method
Properties
- Uncured Properties
Value | Units | Test Method / Conditions | |
Density (25°C) | 0.99 | g/cm3 | — |
MEHQ Content | Undetectable | ppm | — |
Solids (in butyl acetate) | 50 | % | — |
Tack Free Time | min. 18 | — | — |
Viscosity (at 25°C) | 13000 | cP | — |
Yellowness Index {b*] | 0.01 | — | — |
Technical Details & Test Data
- LSR-241P Solvent Evaporation Rate at 30°C
- Film Properties Reduced To 30% Solids With Butyl Acetate
Tensile Strength, psi** Air Dried Sunlight Cured Elongation, % 1,500 5,800 Elastic Modulus, ksi** 700 460 Toughness (J) 3.7 15 Sward Hardness - 30 minutes 2.7 5 Sward Hardness - 24 hours 2 3 Contact Angle 94 88 - Starting Point Formula
Ingredient % Weight LSR-241P (50% Solids) 22.89% CAB, CAP or N/C (based on 100% solids) 11.44% Omnirad@ 819 0.12% Ethyl Acetate 65.55% |Total 100.00%
Safety & Health
- General Information
This product is intended for industrial use only. Keep out of the reach of children. Avoid breathing vapors. Avoid contact with skin, eyes, and clothing. Wear impervious gloves. Repeated or continuous skin contact with uncured material may cause irritation. Remove material from skin with soap and water. Never use organic solvents to remove material from skin and eyes. For more information on the safe handling of this material, please refer to the Safety Data Sheet before use.