Products

Braskem America

Plastics

Browse Applications

Basic Thermoplastics

174 Products found on Braskem America in Plastics

SDSWith SDS

TDSWith TDS

Braskem America LDF0034

Polymer Name:Low Density Polyethylene (LDPE)
Processing Methods:Blown Film Extrusion, Extrusion, Film Extrusion
Melt Flow Index:0.34 - 0.34 g/10 min

Braskem LDF0034 is a low density polyethylene (LDPE) of high molecular weight that provides high mechanical strength. It is used in extrusion of tubular films with excellent mechanical properties and heat shrinkage.

For more information regarding REACH, please visit Braskem's site

Braskem Inspire 6025N

Polymer Name:Polypropylene Homopolymer (HPP)
Processing Methods:Film Extrusion, Compounding, Thermoforming, Stretch Films Extrusion, Extrusion
Additives Included:Nucleating Agent
Melt Flow Index:2.5 - 2.5 g/10 min

Braskem INSPIRE 6025N Polypropylene Homopolymer (HPP) high performance resin is a high crystalline nucleated homopolymer with exceptional stiffness and good optical properties.

All Braskem America production facilities are certified to produce bio, bio-circular, and circular polypropylene under the ISCC PLUS certification via the mass balance approach.

For more information regarding REACH, please visit Braskem's site

UTEC® 5540

Processing Methods:Extrusion, Compression Molding, Ram Extrusion
Polymer Name:Ultra High Molecular Weight Polyethylene (UHMWPE)

Braskem America UTEC® 5540 is an Ultra High Molecular Weight Polyethylene (UHMWPE) with a molecular weight about 10 times higher than High Density Polyethylene (HDPE) resins. This extremely high molecular weight yields several unique properties to this polymer such as high abrasion resistance, impact strength, and low coefficient of friction that makes it a self-lubricating material.

For more information regarding REACH, please visit Braskem's site

Braskem America HDI2061

Polymer Name:High Density Polyethylene (HDPE)
Processing Methods:Injection Molding
Melt Flow Index:20.0 - 20.0 g/10 min

Braskem HDI2061 is a high density polyethylene (HDPE) for injection molding segment. By having good fluidity HDI20612 provides easy processability and high productivity combined with high rigidity and hardness. The narrow molecular weight distribution gives low tendency to deformation.

Braskem America R7021-50RNA

Polymer Name:Polypropylene Random Copolymer (RCP)
Processing Methods:Twin-wall Injection Molding, Thin Wall Injection Molding, Injection Molding
Additives Included:Nucleating Agent
Melt Flow Index:50.0 - 50.0 g/10 min

Braskem R7021-50RNA polypropylene random copolymer (RCP) provides good impact properties, excellent optics, and fast cycle times. It contains clarifier and antistat additives.

All Braskem America production facilities are certified to produce bio, bio-circular, and circular polypropylene under the ISCC PLUS certification via the mass balance approach.

For more information regarding REACH, please visit Braskem's site

Braskem America RT550N

Polymer Name:Polypropylene Random Copolymer (RCP)
Processing Methods:Injection Molding
Melt Flow Index:55.0 - 55.0 g/10 min

RT550N is a polypropylene random copolymer (RCP) with high impact performance, excellent mold release, superior clarity, and excellent processability.

All Braskem America production facilities are certified to produce bio, bio-circular, and circular polypropylene under the ISCC PLUS certification via the mass balance approach.

For more information regarding REACH, please visit Braskem's site

Braskem America LDF0025

Polymer Name:Low Density Polyethylene (LDPE)
Processing Methods:Injection Molding, Film Extrusion
Melt Flow Index:0.25 - 0.25 g/10 min

Braskem LDF0025 is a low density polyethylene of high molecular weight that provides high mechanical strength. The product is highly versatile and can be used in several applications due to their easy processability and high compatibility with other types of polyethylene. It does not contain antiblock and slip additives.

For more information regarding REACH, please visit Braskem's site

RPR 5A1 WE Recycled Polyethylene

Polymer Name:High Density Polyethylene (HDPE)
Labeling Claims:Sustainable, Recycled, Food Contact Acceptable, Contains PCR Resin, Low Carbon Footprint (PCF)
Processing Methods:Blow Molding, Extrusion
Density:955.0 - 955.0 kg/m³

Braskem Recycled PRP 5A1 WE recycled polyethylene is a high-density polyethylene (HDPE) embodying eco-conscious attributes. With labeling claims containing PCR resin, and having a low carbon footprint (PCF), this polymer emphasizes sustainability. Its notable feature includes excellent environmental stress crack resistance (ESCR). Tailored for containers, small bottles, and blow molding of up to 20 L for chemicals, domestic use, and oils Available in a natural color.

For more information regarding REACH, please visit Braskem's site

RPR 3A1 NL Recycled Polyethylene

Polymer Name:High Density Polyethylene (HDPE)
Labeling Claims:Sustainable, Bisphenol A-free, Recycled, Food Contact Acceptable, Contains PCR Resin, Low Carbon Footprint (PCF)
Processing Methods:Blow Molding, Extrusion
Density:955.0 - 955.0 kg/m³

Braskem Recycled RPR 3A1 NL is a high-density polyethylene (HDPE) with eco-friendly attributes. Labeled as bisphenol A-free, containing PCR resin, and boasting a low carbon footprint (PCF), this polymer emphasizes sustainability. With excellent environmental stress crack resistance (ESCR), it caters to the consumer goods, printing, and packaging markets. Ideal for containers, small bottles, and blow molding of up to 20 L for chemicals, domestic use, and oils. Available in a natural color.

For more information regarding REACH, please visit Braskem's site

Braskem America F006EC2

Polymer Name:Polypropylene Homopolymer (HPP)
Processing Methods:Extrusion, Injection Molding, Compounding, Thermoforming, Blow Molding
Melt Flow Index:0.5 - 0.5 g/10 min

Braskem F006EC2 polypropylene homopolymer (HPP) offers enhanced long term heat aging. Applications include compounding, blow molding, profiles, flat sheet, corrugated sheet, pressed slabs, and pressurized radiator surge tanks.

All Braskem America production facilities are certified to produce bio, bio-circular, and circular polypropylene under the ISCC PLUS certification via the mass balance approach.

For more information regarding REACH, please visit Braskem's site

Braskem America TI4900M

Polymer Name:Polypropylene Impact Copolymer (ICP)
Processing Methods:Injection Molding, Compounding
Melt Flow Index:115.0 - 115.0 g/10 min

Braskem TI4900M Polypropylene Impact Copolymer (ICP) provides very high flexural modulus and high melt flow. Applications and suggested uses include compounding, automotive interior trim, intricately designed parts and thin-walled parts.

All Braskem America production facilities are certified to produce bio, bio-circular, and circular polypropylene under the ISCC PLUS certification via the mass balance approach.

For more information regarding REACH, please visit Braskem's site

Braskem America CG350HN

Polymer Name:Polypropylene Impact Copolymer (ICP)
Processing Methods:Thin Wall Injection Molding, Injection Molding, Compounding
Melt Flow Index:35.0 - 35.0 g/10 min

Braskem INSPIRE CG350HN is a polypropylene impact copolymer (ICP) that has a good balance of stiffness and impact strength, as well as excellent long term heat aging properties.

All Braskem America production facilities are certified to produce bio, bio-circular, and circular polypropylene under the ISCC PLUS certification via the mass balance approach.

For more information regarding REACH, please visit Braskem's site

UTEC® 4040

Processing Methods:Ram Extrusion, Compression Molding
Polymer Name:Ultra High Molecular Weight Polyethylene (UHMWPE)

Braskem America UTEC®4040 is an Ultra High Molecular Weight Polyethylene (UHMWPE) with a molecular weight about 10 times higher than High Density Polyethylene (HDPE) resins. This extremely high molecular weight yields several unique properties to this polymer such as high abrasion resistance, impact strength, and low coefficient of friction that makes it a self-lubricating material.

For more information regarding REACH, please visit Braskem's site

Braskem America HDB0355

Polymer Name:High Density Polyethylene (HDPE)
Processing Methods:Extrusion Blow Molding (EBM), Blow Molding
Melt Flow Index:0.35 - 0.35 g/10 min

Braskem HDB0355 is a high density polyethylene copolymer (HDPE) developed for blow molding applications. This product is suitable for applications that require a good enviromental stress cracking resistance (ESCR).

Braskem America GF4950HS

Polymer Name:High Density Polyethylene (HDPE)
Processing Methods:Extrusion Blow Molding (EBM)
Melt Flow Index:20.0 - 20.0 g/10 min

Braskem GF4950HS is a high density polyethylene copolymer offering an outstanding combination of good processability and excellent stress cracking resistance (ESCR). It is recommended for the production of containers, flasks and bottles up to 30 liters for the transport of chemical products.

For more information regarding REACH, please visit Braskem's site

Braskem America HDP0353

Polymer Name:High Density Polyethylene (HDPE)
Processing Methods:Pipe Extrusion
Melt Flow Index:0.35 - 0.35 g/10 min

Braskem HDP0353 is a high density polyethylene copolymer (HDPE) developed for corrugated piping. Applications and suggested users include Industrial Standard Compliance ASTM D 3350 and Cell Classification PE 435620A.

Braskem America HDB0763

Polymer Name:High Density Polyethylene (HDPE)
Processing Methods:Blow Molding, Extrusion Blow Molding (EBM)

Braskem HDB0763 is a high density polyethylene copolymer (HDPE) designed for blow molding of food packaging. It exhibits excellent processing properties and extremely low odor transfer in finished goods.

Braskem America CP360H

Polymer Name:Polypropylene Homopolymer (HPP)
Processing Methods:High-speed Fiber Spinning, Extrusion, Injection Molding, Spunbond Nonwovens, Fibers Extrusion
Melt Flow Index:34.0 - 34.0 g/10 min

Braskem CP360H polypropylene homopolymer is a high melt flow rate homopolymer designed for spunbond nonwoven production. This resin features an excellent processability allowing increased line speed or air pressure as well as gains of mechanical properties. The narrow molecular weight distribution AGF stability and tight gel control provide its unique performance.

All Braskem America production facilities are certified to produce bio, bio-circular, and circular polypropylene under the ISCC PLUS certification via the mass balance approach.

For more information regarding REACH, please visit Braskem's site

UTEC® 3040

Processing Methods:Ram Extrusion, Compression Molding
Polymer Name:Ultra High Molecular Weight Polyethylene (UHMWPE)

Braskem America UTEC® 3040 is an ultra high molecular weight polyethylene (UHMWPE) with a molecular weight about 10 times higher than High Density Polyethylene (HDPE) resins. This extremely high molecular weight yields several unique properties to this polymer such as high abrasion resistance, impact strength and low coefficient of friction that makes it a self-lubricating material.

For more information regarding REACH, please visit Braskem's site

Braskem 2000 Series TI-2350C

Polymer Name:Polypropylene Impact Copolymer (ICP)
Processing Methods:Compounding
Melt Flow Index:40.0 - 40.0 g/10 min

Braskem 2000 Series TI-2350C is a polypropylene impact copolymer offering a highly crystalline homopolymer phase, very high molecular weight EPR phase, very high flexural modulus, reduced emissions, reduced gels and high melt flow.

All Braskem America production facilities are certified to produce bio, bio-circular, and circular polypropylene under the ISCC PLUS certification via the mass balance approach.

For more information regarding REACH, please visit Braskem's site

Braskem America 6D83K

Polymer Name:Polypropylene Random Copolymer (RCP)
Processing Methods:Blow Molding, Extrusion
Additives Included:Nucleating Agent
Melt Flow Index:1.9 - 1.9 g/10 min

Braskem 6d83k is a polypropylene random copolymer (RCP) with consistent processability, low odor and taste transfer, high gloss, good regrind stability. It contains a clarifying additive.

UTEC® 3041

Processing Methods:Ram Extrusion, Compression Molding
Polymer Name:Ultra High Molecular Weight Polyethylene (UHMWPE)

Braskem America UTEC® 3041 is an ultra high molecular weight polyethylene (UHMWPE) with a molecular weight about 10 times higher than High Density Polyethylene (HDPE) resins. This extremely high molecular weight yields several unique properties to this polymer such as high abrasion resistance, impact strength, and low coefficient of friction that makes it a self-lubricating material.

For more information regarding REACH, please visit Braskem's site

Braskem America RP 250

Polymer Name:Polypropylene Random Copolymer (RCP)
Processing Methods:Twin-wall Injection Molding, Injection Molding
Melt Flow Index:35.0 - 35.0 g/10 min

Braskem RP 250 polypropylene random copolymer (RCP) offers superior processing stability, superior clarity, esthetics and enhanced optical properties and excellent mold release.

All Braskem America production facilities are certified to produce bio, bio-circular, and circular polypropylene under the ISCC PLUS certification via the mass balance approach.

For more information regarding REACH, please visit Braskem's site

Braskem America CP350WV

Polymer Name:Polypropylene Homopolymer (HPP)
Processing Methods:Thin Wall Injection Molding, Injection Molding
Additives Included:Nucleating Agent
Melt Flow Index:35.0 - 35.0 g/10 min

Braskem CP350WV Polypropylene Homopolymer (HPP) offers narrow molecular weight distribution, nucleated and good mold release. Applications and suggested users include fast cycle injection molding, large-part injection molding and disposable drinkware.

All Braskem America production facilities are certified to produce bio, bio-circular, and circular polypropylene under the ISCC PLUS certification via the mass balance approach.

For more information regarding REACH, please visit Braskem's site

Braskem Prisma® 6810

Polymer Name:Polypropylene Impact Copolymer (ICP)
Processing Methods:Thermoforming
Melt Flow Index:2.0 - 2.0 g/10 min

Braskem Prisma 6810 polypropylene impact copolymer (ICP) resin is a next generation clear impact copolymer designed for a great balance of stiffness, toughness and clarity.

All Braskem America production facilities are certified to produce bio, bio-circular, and circular polypropylene under the ISCC PLUS certification via the mass balance approach.

For more information regarding REACH, please visit Braskem's site

Braskem America HDB0358

Polymer Name:High Density Polyethylene (HDPE)
Processing Methods:Extrusion, Sheet Extrusion, Pipe Extrusion, Blow Molding

Braskem HDB0358 is a bimodal high density polyethylene copolymer grade. Offers an outstanding balance between stiffness, impact strength, and Environmental Stress Cracking Resistance (ESCR) ideal for a wide range of blow molding applications. This grade is particularly well suited to chemical and detergent packaging as the exceptional ESCR can allow for significant bottle weight reduction.

For more information regarding REACH, please visit Braskem's site

UTEC® 6540G

Processing Methods:Extrusion, Compression Molding, Ram Extrusion
Polymer Name:Ultra High Molecular Weight Polyethylene (UHMWPE)

Braskem America UTEC® 6540G is an Ultra High Molecular Weight Polyethylene (UHMWPE) with a molecular weight about 10 times higher than High Density Polyethylene (HDPE) resins. This extremely high molecular weight yields several unique properties to this polymer such as high abrasion resistance, impact strength and low coefficient of friction that makes it a self-lubricating material.

For more information regarding REACH, please visit Braskem's site

Braskem 2000 Series TI-2900C

Polymer Name:Polypropylene Impact Copolymer (ICP)
Processing Methods:Injection Molding, Compounding
Melt Flow Index:115.0 - 115.0 g/10 min

Braskem 2000 Series TI-2900C is a heterophasic copolymer. It is a high performance polypropylene impact copolymer designed for injection molding processes with excellent flowability and tiger-marks resistance.

All Braskem America production facilities are certified to produce bio, bio-circular, and circular polypropylene under the ISCC PLUS certification via the mass balance approach.

For more information regarding REACH, please visit Braskem's site

Braskem America HD3403S

Polymer Name:High Density Polyethylene (HDPE)
Processing Methods:Injection Molding, Compression Molding
Melt Flow Index:4.5 - 4.5 g/10 min

Braskem HD3403S is a high density polyethylene with outstanding organoleptic properties in addition to great processability and high stiffiness.

For more information regarding REACH, please visit Braskem's site

Braskem America CP250H

Polymer Name:Polypropylene Homopolymer (HPP)
Processing Methods:Fibers Extrusion
Melt Flow Index:25.0 - 25.0 g/10 min

Braskem CP250H polypropylene homopolymer (HPP) offers narrow MWD and low smoke and condensate. Applications and sugested users include spunbond nonwovens, high-speed fiber spinning continuous filament yarns and stable fiber.

Braskem America FT120W2

Polymer Name:Polypropylene Homopolymer (HPP)
Processing Methods:Injection Molding
Additives Included:Anti-Static Agent
Melt Flow Index:12.0 - 12.0 g/10 min

Braskem FT120W2 polypropylene homopolymer (HPP) offers antistatic properties and good mold release. Applications and suggested users include closures and housewares.

All Braskem America production facilities are certified to produce bio, bio-circular, and circular polypropylene under the ISCC PLUS certification via the mass balance approach.

For more information regarding REACH, please visit Braskem's site

Braskem America C7054-07NA

Polymer Name:Polypropylene Impact Copolymer (ICP)
Processing Methods:Thermoforming, Extrusion, Injection Molding
Additives Included:Nucleating Agent, Anti-Static Agent
Melt Flow Index:7.0 - 7.0 g/10 min

Braskem C7054-07NA polypropylene impact copolymer (ICP) offers high stiffness and high toughness and contains a nucleating and antistatic additive. Applications and suggested uses include:

Injection molding
Thermoforming applications
Rigid packaging
Extruded sheets
Durables
Appliances
Material handling.

All Braskem America production facilities are certified to produce bio, bio-circular, and circular polypropylene under the ISCC PLUS certification via the mass balance approach.

For more information regarding REACH, please visit Braskem's site

Braskem Inspire 6123EN

Polymer Name:Polypropylene Random Copolymer (RCP)
Processing Methods:Extrusion, Thermoforming
Melt Flow Index:2.0 - 2.0 g/10 min

Braskem INSPIRE 6123EN polypropylene random copolymer resin (RCP) is a high performance nucleated polypropylene with great balance of clarity and physical properties

All Braskem America production facilities are certified to produce bio, bio-circular, and circular polypropylene under the ISCC PLUS certification via the mass balance approach.

For more information regarding REACH, please visit Braskem's site

Braskem Inspire 114

Polymer Name:Polypropylene Impact Copolymer (ICP)
Processing Methods:Blow Molding, Stretch Films Extrusion, Extrusion, Film Extrusion, Compounding, Thermoforming
Melt Flow Index:0.5 - 0.5 g/10 min

Braskem Inspire® 114 EU polypropylene impact copolymer is a propylene based resin very suitable for extrusion applications including blown films, sheets, profiles, pipes and blow molded containers. Inspire® 114 EU Performance Polymer has an excellent balance of high stiffness and impact resistance, even at low temperatures. Inspire® 114 EU Performance Polymer combines outstanding mechanical proper es with superior processability due to its high melt strength delivering improved sag properties compared to conventional polypropylenes.

All Braskem America production facilities are certified to produce bio, bio-circular, and circular polypropylene under the ISCC PLUS certification via the mass balance approach.

For more information regarding REACH, please visit Braskem's site

Braskem America D130C

Polymer Name:Polypropylene Homopolymer (HPP)
Processing Methods:Fibers Extrusion
Melt Flow Index:14.0 - 14.0 g/10 min

Braskem D130C is a high bulk polypropylene homopolymer (HPP). Applications and suggested uses include fine denier staple fiber and high speed fiber spinning.

All Braskem America production facilities are certified to produce bio, bio-circular, and circular polypropylene under the ISCC PLUS certification via the mass balance approach.

For more information regarding REACH, please visit Braskem's site

Braskem America HDF1050

Polymer Name:High Density Polyethylene (HDPE)
Processing Methods:Blown Film Extrusion, Extrusion, Film Extrusion
Melt Flow Index:9.5 - 9.5 g/10 min

Braskem HDF1050 is a high molecular weight high density polyethylene copolymer (HDPE) with broad bimodal weight distribution developed for the blown film segment. Films made with this resin offer high stiffness, good heat sealing response and resistance to trait propagation.

Show

of 174 results

Food & Nutrition Formulations

Agriculture & Feed

Sustainable Cosmetic Ingredients

Agrochemicals

Products

Braskem America

Browse Applications