Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- CASE Ingredients Functions
- Solvents
- Water
- Technologies
- Product Families
- Composition
Solution of an ammonium salt of an acrylate copolymer
Features & Benefits
- CASE Ingredients Features
Applications & Uses
- Applications
- Adhesive & Sealant Type
- Coating Type
- Coatings Industry
Special Features and Benefits - BYK-154 stabilizes pigments and fillers by electrostatic repulsion and is recommended for aqueous emulsion paints. The additive increases gloss, reduces viscosity and improves storage stability. Combined with a wetting additive such as DISPERKBYK-187, the colorant acceptance is improved when tinting with universal colorants. BYK-154 does not stabilize foam.
Recommended Use -
Architectural Coatings
Especially Recommended
Protective Coatings
Especially Recommended
Industrial Coatings
Recommended
Recommended Levels - Amount of additive (as supplied) based upon pigment:
- Inorganic pigments: 2-10%
- Titanium dioxides: 1.5-2%
- Fillers: 0.5-1%
The above recommended levels can be used for orientation. Optimal levels are determined through a series of laboratory tests.
Incorporation and Processing - Instructions For optimum performance, the additive must be incorporated into the mill base before the addition of pigments.
Special Note - In protective coating systems the use of an additional dispersant based on an organic phosphate compound is recommended together with BYK-154 to improve the storage stability.
- Adhesives And Sealants
Special Features and Benefits -
BYK-154 stabilizes the pigments and fillers by electrostatic repulsion and is recommended for all aqueous emulsion adhesives and sealants.
Recommended Levels - Amount of additive (as supplied) based upon pigment:
- Inorganic pigments: 2-10%
- Titanium dioxides: 1.5-2%
- Fillers: 0.5-1%
The above recommended levels can be used for orientation. Optimal levels are determined through a series of laboratory tests.
Incorporation and Processing - Instructions For optimum performance, the additive must be incorporated into the mill base before the addition of pigments.
Properties
- Typical Properties
Value | Units | Test Method / Conditions | |
Density At 20°C | 1.16 | g/ml | — |
Non-Volatile Matter (10 min., 150 °C) | 42 | % | — |
Regulatory & Compliance
- Certifications & Compliance
Storage & Handling
- Storage And Transportation
The product may solidify below 5°C. Heat to 20°C and stir