Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- CASE Ingredients Functions
- Technologies
- Product Families
Features & Benefits
- CASE Ingredients Features
- Advantages
- High green strength allows cold-pressed part to be easily handled before oven post-cure
- High tg is key to thermal Class F (155°C) rating
- Low shrinkage and moisture absorption to reduce core stress and preserve magnetic properties
- Optimal particle distribution provide excellent green strength after cold pressing
- Superior Mechanical Strength for long product life
- Short curing times for maximum productivity
- Features
- Easy to use without measuring and mixing
- Good coil impregnation (Low viscosity)
- Fast curing
- Excellent adhesive strength at high temperature
- Good heat resistance for long-term
- Excellent electrical resistance
Applications & Uses
- Markets
- Coating Type
- Curing Condition
60min at 150°C
Properties
- Physical Form
- Typical Properties
Value | Units | Test Method / Conditions | |
Specific Gravity | 1.2 | — | — |
Hardness Durometer | 84 | Shore D | — |
Flexural Strength at 25°C | 132 | N/mm2 | — |
Shear Strength | 12.2 | N/mm2 | — |
Tensile Strength | 59 | MPa | — |
Viscosity | 2260 | mPa.s | — |
Dielectric Constant at 23 ˚C/1 kHz | 4 | — | — |
UL Rating | Class H | — | — |
Coefficient of Thermal Expansion (CTE), α1 | 67 | ppm/°C | — |
Coefficient of Thermal Expansion (CTE), α2 | 192 | ppm/°C | — |
Gel Time at 160°C | 124 | sec | — |
Glass Transition Temperature (Tg) | 179 | °C | — |
Specific Heat Capacity | 1.3 | J/g °C | — |
Storage & Handling
- Storage & Handling
Powder should be stored at 10°C or below, in closed containers. After removal from cold storage, the material must be allowed to come to room temperature in the sealed container to avoid moisture contamination. Suggested waiting time is 24 hours. Please consult our Product Handling Recommendations for Coating Powders. For safe handling information on this product, consult the Material Safety Data Sheet (SDS).
- Pot Life
2160 hours