Knowde Enhanced TDS
Identification & Functionality
- Product Type
- Technologies
- Product Families
Features & Benefits
Applications & Uses
- Markets
- Applications
- Typical Applications
Densely packed power supplies, integrated circuits, thick film hybrid devices, D/A converters, delay lines, oscillators, minidac, operational amplifiers, binary devices, relays, transformers and semiconductors.
- Room Temperature Cure
- H-1 Hardener: Cures overnight at room temperature or 2 hrs at 65°C. Do not heat cure if the mass exceeds 200 grams.
- H-18 Hardener: Cures overnight at room temperature or 2 hrs at 65°C. Do not heat cure if the mass exceeds 200 grams.
- Mixing Instructions
Mix CC3-301AD-FR Flex-12 thoroughly in it’s shipping container to insure a uniform consistency. Weigh out the desired amount of resin in a clean container. Add the hardener accurately by weight in the proper proportion as specified above. (ie. 5.9 grams of H-1 Hardener and 100 grams of CC3-301AD-FR Flex-12 for a total mix of 105.9 grams) Mix thoroughly. Use in a well ventilated area and avoid contact with eyes and skin.
Properties
- Color
- Flame Rating
- Physical & Electrical Properties
| Value | Units | Test Method / Conditions | |
| Coefficient of Thermal Expansion | 32 x 10^(-6) | in/in/’C | - |
| Compressive Strength (25°C) | 20000.0 | psi | - |
| Dielectric Constant (25°C, 100 KC) | 5.6 | - | - |
| Dielectric Strength | 500.0 | volts/mil | - |
| Dissapation Factor (25°C, 100 KC) | 0.02 | - | - |
| Heat Distortion | 65.0 | °C | - |
| Izod Impact (of Notch) | 1.0 | ft lbs/in | - |
| Linear Shrinkage | 0.004 | in/in | - |
| Service Temperature (Continuous) | -55 - 155 | °C | - |
| Specific Gravity (Catalyzed, 25°C) | 1.46 | - | - |
| Specific Gravity (Uncatalyzed, 25°C) | 1.55 | - | - |
| Tensile Strength (25°C) | 7400.0 | psi | - |
| Thermal Conductivity | 1.26 | W/mK | - |
| Viscosity (Catalyzed, 22.5°C) | 675.0 | cps | - |
| Viscosity (Uncatalyzed, 22.5°C) | 2030.0 | cps | - |
| Volume Resistivity (25°C) | 1016.0 | ohm-cm | - |
| Water Absorption (7 days, 25°C) | 0.3 | % | - |
Regulatory & Compliance
- Certifications & Compliance
- Regulations
CC3-301AD-FR Flex-12 meets MIL T-27, Grade 5, Class S; MIL STD. 202.111, FED TEST METHOD STD. 406-2021; MIL I-16923, Types C and D; and UL-94V-0.
Technical Details & Test Data
- Choice of Hardeners
- H-1 Hardener: Rigid, good dimensional stability, fast cure.
- H-18 Hardener: Resilient, excellent mechanical and thermal shock, low viscosity, good air release, fast cure.
HARDENER PARTS BY WEIGHT PER 100 PARTS OF RESIN POT LIFE 100 GRAM 25°C (77°F) CURE TIME 25°C (77°F) CURE TIME 65°C (149°F) CURE TIME 125°C (257°F)
H-1 Hardener 5.9 2 hrs. 24 hrs. 2 hrs. - - - H-18 Hardener 12.2 3 hrs. 24 hrs. 2 hrs. - - -