Products

CENTROMID 12 GF / PA 12 GF 30 is reinforced with 30% glassfibres. This leads to stiffness and increased resistance in the binding substance and an increased heat distortion resistance at the same time. The impact strength is reduced, the tensile strength is increased up to 6.000 MPa. PA 12 GF 30-plastics are often used as lever or valve components.

CENTROLEN / PP GF 30 is reinforced with 30% glass-fibers. This leads to stiffness and increased resistance in the binding substance and an increased heat distortion resistance at the same time. The impact strength is reduced, the tensile and bending strength is increased up to 6.500 MPa and/or 5.500 MPa. PP GF 30-plastics are often used as fan blades or air filter housings.

CENTROLAB HT / PP-HT is a semi-crystalline plastic, which distinguishes itself through its high acid and chemical resistance and mechanical strength. PP-HT is applicable within a temperature range of -30 to temporary +140 °C. Due to its high resistance to temperature, PP-HT-plastics are often used in medical technology as sterilization boxes or for analysis devices. The BfR-/FDA approval, as well as the conformity in accordance with USP Class VI provide physiological safety. PP-HT is available in the color white.