Products

CENTROLEN / PP-H is a semi-crystalline thermoplastic, but possesses higher resistance, stiffness and melting temperature with low density. The dynamic stability is equally high. PP-H is applicable within a temperature range of +2 to 130 °C. PP-H is used in apparatus engineering and in the chemical industry. The BfR-/FDA approval assures physiological safety. PP-H is available in the colors natural and gray.

CENTROMID 12 LE / PA 12 LE soft-plastics are often used as flexible hoses for screw and spiral conveyors in the food industry. During the modification with PA 12 LE soft, a special “food compliant” softener is added to the basic polyamide 12 polymer. The modification is also food safe. The resistance of the binding substance is reduced, the application temperature decreases to 130 °C. The tensile strength is reduced to 350 MPa.

CENTROMID 12 GF / PA 12 GF 30 is reinforced with 30% glassfibres. This leads to stiffness and increased resistance in the binding substance and an increased heat distortion resistance at the same time. The impact strength is reduced, the tensile strength is increased up to 6.000 MPa. PA 12 GF 30-plastics are often used as lever or valve components.

CENTROLEN / PP LF is added to the basic polypropylene polymer. The plastic can conduct electricity; the high resistance to tear and chemicals remains intact. The specific surface resistance is reduced to 10³ Ohm. PP LF-plastics are often used as filter heads, casings or as mechanical conveyors for flammable liquids.

CENTROTRO / PPS is hardly inflammable. The flammability in accordance with the UL-Standard is improved from HB to V2 (vertical burning). The excellent mechanical properties remain. PPs is also easily weldable and machinable. PPs-plastics are often used in apparatus engineering or as exhaust gas systems for heating systems.

CENTROMID 6 GF / PA 6 GF 30 is reinforced with 30% glass-fibers. This leads to stiffness and increased resistance in the composite material and an increased heat distortion resistance at the same time. The impact strength is reduced, the tensile strength is increased up to 8.700 MPa. PA 6 GF 30 plastics are often used as track and rope pulleys.

CENTROLEN / PE-HD is a semi-crystalline thermoplastic, which distinguishes itself through its high resistance to stress cracking and chemical stability. PE-HD is applicable within a temperature range of -75 to +120 °C. The plastic, belonging to the group of polyolef ines, is water repellent and non-swelling. Due to its low density and excellent machinability, PE-HD is often used in the machinery and food industry. PEHD is available in the colors natural and black, as well as in custom colors upon request.

CENTROLEN / PE-UHMW is polymerised with a modified Ziegler-Catalyst. The density is lowered and the sliding friction coefficient is improved. PE-UHMW distinguishes itself through its very high impact resistance and abrasion resistance. The BfR-/FDA approval assures physiological safety. Sliding guides or pump and wear parts are often manufactured from PE-UHMW.