Knowde Enhanced TDS
Identification & Functionality
- Product Type
- Technologies
- Product Families
Features & Benefits
- Ready-to-Use Product Features
Applications & Uses
- Markets
- Application Area
- Application Method
- Compatible Substrates & Surfaces
- Primary Applications
Downhole tubing and casing, critical drill pipe service Recommended Services Oil / Water / Gas Production Brine Injection / SWD’s / Rod-pumping wells** *As corrosive gas content increases, operating temperature decreases. Please consult technical representative when corrosive gasses are present. **Rod-guides recommended if side load is
- Suggested Uses
Oil / Water / Gas Production Brine Injection / Disposal
- Mixing Ratios By Weight
6.4 parts of Part A to 1 part of Part B by weight 4.0 parts of Part A to 1 part of Part B by volume
- Number Of Coats / Dry Film Thickness
CeRam-Kote® PCF is applied in two coats to achieve a DFT of 10-15 mils (250-375 microns).
- Surface Preparation/Mixing/ Thinning/Application
Application of CeRam-Kote® PCF on I.D. of Oil Country Tubular Goods is a licensed application process. More information can be obtained by contacting Freecom, Inc.
- Pot Life
Pot life for CeRam-Kote® PCF at 72°F (22.2°C) is approximately one (1) hour. Colder temperatures will increase the pot life and warmer temperatures will decrease the pot life. Keep cans out of direct sunlight to prevent heat buildup
Properties
- Physical Properties
| Value | Units | Test Method / Conditions | |
| VOC ( less water (calculated value) | 2.2 | lb/gal | — |
| Volume Solids (calculated value) | 78 - 82 | % | — |
| Volume Solids (calculated value) | 87 - 89 | — | — |
| Weight | 1.8 | kg/liter | — |
Storage & Handling
- Shelf Life
It is recommended that CeRam-Kote® PCF be used within two (2) years of delivery.
- Storage Conditions
As long as the material is stored under its flashpoint (65°F, 18°C), there should be no detrimental effects. If the coating is stored at temperatures higher than 65°F or 18°C, it is important to ensure the containers for Part A are sealed to limit the amount of vapor pressure build-up and limit the amount of solvent release. If the coating is stored at below freezing temperatures (32°F or 0°C) some resin crystallization may occur. Once the coating temperature is brought back to above freezing, the resin will return to normal. CERAM-KOTE® recommends the coating to be warmed to 40 - 50°C to revert any crystallization that may have occurred. This will have no detrimental effects to the properties of CeRam-Kote® PCF.