Products

HumiSeal® 1B18 is a single component, fast drying, acrylic conformal coating intended for use on printed circuit assemblies. HumiSeal® 1B18 demonstrates excellent flexibility and electrical properties, fluoresces under UV light for ease of inspection and is easily repaired. HumiSeal® 1B18 coating is RoHS Directive 2002/95/EC compliant, and recognized under UL File Number E105698.

HumiSeal® Acrylic Gel is a fast drying, single component, thixotropic acrylic paste that provides excellent moisture and environmental protection for printed circuit assemblies. HumiSeal® Acrylic Gel has been designed for use with our acrylic conformal coatings. HumiSeal® Acrylic Gel can be used for sealing, damming and to provide an extra level of protection around component leads. HumiSeal® Acrylic Gel fluoresces under UV light for ease of inspection and is easily repaired. HumiSeal® Acrylic Gel is in full compliance with the RoHS Directive 2002/95/EC.

HumiSeal® 1B66 is a fast drying, single component, acrylic conformal coating that provides excellent moisture and environmental protection for printed circuit assemblies. HumiSeal® 1B66 demonstrates outstanding flexibility and is easily repaired. HumiSeal® 1B66 coating is RoHS Directive 2002/95/EC compliant.

HumiSeal® 1B15 is a single component, fast drying, easily repaired, acrylic conformal coating intended for use on printed circuit assemblies. HumiSeal® 1B15 coating is RoHS Directive 2002/95/EC compliant.

HumiSeal® 1R32 LTX is a fast drying, single component acrylic conformal coating, specifically designed to protect against the effects of moisture, corrosive environments and dirt. It is specially formulated with reduced xylene and toluene concentration to be fully compliant with GB30981-2020.

HumiSeal® 1A20R is a single component, chemically resistant, fast curing polyurethane conformal coating. HumiSeal® 1A20R fluoresces under UV light for ease of inspection. HumiSeal® 1A20R coating is MIL-I-46058C qualified, IPC-CC-830 and RoHS Directive 2002/95/EC compliant.

HumiSeal® 1A27 is a single component, polyurethane conformal coating, suitable for general printed circuit board applications. HumiSeal® 1A27 contains no free isocyanates. HumiSeal® 1A27 coating is RoHS Directive 2002/95/EC compliant and recognized under UL File Number E105698.

Humiseal Epoxy Adhesives Family perform in the most challenging environments due to their robust curing mechanism and resulting strength. Epoxies are used in industries including electronics, automotive, and health care devices among others. Humiseal epoxy adhesives are supplied as 2 components, chemical cure systems.

HumiSeal® 1A33 is a single component, polyurethane conformal coating, suitable for general printed circuit board applications. HumiSeal® 1A33 contains no free isocyanates and fluoresces under UV light for inspection purposes. HumiSeal® 1A33 coating is MIL-I-46058C qualified, IPC-CC-830B and RoHS Directive 2011/65/EC compliant and recognized under UL File Number E105698.

HumiSeal® 1A20 is a single component, chemically resistant, fast curing polyurethane conformal coating. HumiSeal® 1A20 fluoresces under UV light for ease of inspection. HumiSeal® 1A20 coating is MIL-I-46058C qualified, IPC-CC830 and RoHS Directive 2002/95/EC compliant and recognized under UL File Number E105698.

Vivid Cure™ Uv7041 Is Low Stress, Liquid Optically Clear Adhesive (Loca) Fast Curing, Water White, Urethane Acrylate Designed For Utilization As An Lcd Interface Adhesive. This Product Is A Soft, Flexible, Low Modulus Polymer That Provides A High Amount Of Bond Strength Without Imparting Stress. This Is A Non-Yellowing Adhesive That Exhibits Excellent Resistance To Moisture.

HumiSeal® 1A27 LTX is a single component, polyurethane conformal coating, suitable for general printed circuit board applications. It is specially formulated with reduced xylene and toluene concentration to be fully compliant with GB30981-2020*. HumiSeal® 1A27 LTX contains no free isocyanates.

Humiseal Urethane Adhesives Family are designed for demanding bonding requirements in industries including electronics, automotive, and health care devices among others. Polyurethanes are supplied as 2 component, chemical cure systems.

HumiSeal® 1B31 is a fast drying, single component, acrylic conformal coating that provides excellent moisture and environmental protection for printed circuit assemblies. HumiSeal® 1B31 demonstrates excellent flexibility, fluoresces under UV light for ease of inspection and is easily repaired. HumiSeal® 1B31 coating is MIL-I-46058C qualified, IPC-CC-830 and RoHS Directive 2002/95/EC compliant.

HumiSeal® 1B31 LTX is a fast drying, single component acrylic conformal coating, specifically designed to protect against the effects of moisture, corrosive environments and dirt. It is specially formulated with reduced xylene and toluene concentration to be fully compliant with GB30981-2020*. Humiseal 1B31 LTX is available in a range of preblends, which are formulated for use with no further dilution.

HumiSeal® 1B73 is a single component, fast drying, acrylic conformal coating intended for use on printed circuit assemblies. HumiSeal® 1B73 is also produced as pre-blended products, at a range of viscosities, suitable for a variety of application methods without further dilution. After complete cure, the properties of HumiSeal® 1B73 Pre-blends and HumiSeal® 1B73 are comparable.

HumiSeal® 1R32 is a fast drying, single component acrylic conformal coating that provides excellent moisture and environmental protection for printed circuit assemblies. HumiSeal® 1R32 fluoresces under UV light for ease of inspection and is easily repaired. HumiSeal® 1R32 is in full compliance with the RoHS Directive 2002/95/EC.