Brands

CP-500W is a one component, VOC compliant, penetrating water repellent which contains a proprietary modified siloxane. This water-based siloxane penetrates most masonry and concrete pores and capillaries up to ¼ inch or more depending on surface porosity and moisture content at the time of application. CP-500W reacts with the silica in concrete and masonry in the presence of ultraviolet light and atmospheric moisture. This reaction forms strong permanent bonds beneath the surface and creates a hydrophobic zone that prevents water molecules from penetrating, while allowing free migration of water vapors. The chemical bonds formed in this process allow CP-500W to become integral part of the substrate and provide long-term water repellent protection.

SW-244-40 VOC is a DOT grade clear, penetrating 40% alkylalkoxysilane water repellent designed for the protection of exterior above-grade concrete, brick masonry. It penetrates the surface and bonds chemically to the substrate, resulting in permanent attachment of the water repellent molecule. SW-244-40 VOC is not a coating and as a result will not discolor or change the surface appearance in any way.

CP-500 PREMIUM protects masonry and other building materials against damage due to penetration by water and waterborne chemicals. CP-500 PREMIUM is not a surface coating. It penetrates up to ¼ inch or ore into treated surfaces and bonds with the substrate to provide long lasting, protection, even at hairline cracks.

SW-244-100 VOC is a high performance, 100% silane water repellent. This unique silane system is designed to penetrate deeply into the substrate and impart a high level of water and chloride ion screening. This provides the substrate with long lasting protection. SW-244-100 VOC is not a coating and as a result will not discolor or change surface appearance.

CP-1007 is a non-flammable, non-toxic, non-acid, penetrating silicate sealer that strengthens and internally waterproofs cementious materials. CP-1007 is water-based and environmentally friendly. Unlike membrane forming sealers which can be worn away in high traffic areas’, leaving unprotected concrete unsightly and susceptible to chemical attack, CP-1007 penetrates into the surface and cannot be scratched or peeled off. When applied to concrete or masonry, CP-1007 reacts with calcium hydroxide and reduces porosity and permeability of the concrete matrix. This serves to increase the hardness and chemical resistance which, in turn, increases the service life of the surface. In conditions where salt air and humidity attack the concrete, causing oxidation of the reinforcing steel, CP-1007 has proved to halt such corrosion activity. When the CP-1007 is applied to concrete exposed to such conditions, exfoliation or expulsion of the chlorides takes place. The CP-1007 reacts with free alkali in the concrete forming a silica hydrogel that fills the capillaries within the matrix. This hydrogel waterproofs and seals the surface after all materials harmful to the concrete are removed. This process could take up to thirty days or longer, depending on the chloride and acidic residual concentration within the capillaries.

SILANE WB CONCENTRATE™ is a VOC compliant modified silane water repellent concentrate designed for dilution with fresh potable water at the jobsite. When diluted, SILANE WB CONCENTRATE™ may be applied to vertical and horizontal, dense and porous masonry surfaces. SILANE WB CONCENTRATE™ is solvent free and VOC compliant. Prepared solutions react with the silica in concrete and masonry in the presence of ultraviolet light and atmospheric moisture. This reaction forms strong permanent bonds beneath the surface and creates a hydrophobic zone that prevents water molecules from penetrating, while allowing free migration of water vapors. The chemical bonds formed in this process become an integral part of the substrate and provide long-term water repellent protection.

An odorless, water based solution of potassium methyl siliconate developed to effectively treat a wide range of natural stone and masonry surfaces. CP-1000 provides long-lasting protection without altering the natural appearance of the substrate.