Knowde Enhanced TDS
Identification & Functionality
- Carrier
- Chemical Family
- CASE Ingredients Functions
- Fluids & Lubricants Functions
- Technologies
Features & Benefits
- CASE Ingredients Features
- Benefits
- Effective in high shearing conditions.
- Excellent foam generation control over long period of time.
- Heat-resistant (until 80º C)
Applications & Uses
- Markets
- Compatible Polymers & Resins
- Fluids & Lubricants Type
- Adhesive & Sealant Type
- Coating Type
- Fluids & Lubricants End Use
- Use Level
- 0.2 - 0.6%
- Application Information
- Appropriate for products based on different resin, such as acrylic-styrene, pure acrylic, alkydic, butadiene-styrene and polyvinyl acetate.
- It can also be applied in the buffer tank of cutting oil cooling circuit, using dosages from 250ppm depending on the specific characteristics of the circuit.
- Use Dosages
- As a general guidance, the most usual dosages vary between 0.2 and 0.6% for adhesives and paints and 0.3 and 1% for taladrines and cutting fluids.
- Ideal dosage should be evaluated using case-by-case tests taking in account the specific application of the product.
- Use Guidelines
- When used for paints and coatings, add 2/3 of the product at the beginning of manufacturing process, and 1/3 just before adding the resin. Mix thoroughly until a correct distribution of the product is guaranteed.
- In adhesives and taladrines, add the product as sooner as better during the manufacturing process. In cutting oils, add the product regularly into the buffer tank. The dosage will depend on the water and circuit fluid renewal.
- In each installation, the experience will show which is the best dosing point. Mix the product before using it.
Properties
- Physical Form
- Appearance
- White, opaque liquid
- Odor
- Characteristic odor
- Insoluble in
- Water
- Characteristics
Value | Units | Test Method / Conditions | |
pH | 6.0 - 8.0 | - | - |
Viscosity | 400 - 1200 | cPs | - |
Regulatory & Compliance
- Certifications & Compliance
Technical Details & Test Data
- Efficacy
- Highly effective controlling the foaming generation process during manufacturing, handling and storage processes of paints and aqueous glues.
- Tests according to most habitual use conditions show a remarkable decrease in the foam generation compared with untreated samples.
Packaging & Availability
- Packaging Information
23kg - 190kg - 950kg.
Storage & Handling
- Shelf Life
- 12 Months
- Storage and Handling Information
- Store in a cool dry room between 0ºC and 40ºC protected from frost, extreme heat and direct sunlight. Store the product well closed in the original container. This product is sensible to extreme temperatures. If the advised storage temperatures can not be achieved, check the product before using it; it can be necessary to reassemble the emulsion at ambient temperatures.
- Typical risk mitigation measures for chemical products should be applied when handling the product, including using protection clothes, gloves and protective glasses. Use chemicals safely. Always read the label and product information before use.