ChemSystems

ChemSystems Floor Finish Plus (Satin) is a water-based product, is a high-solids, matte finish to be used over interior applications of CSI solvent-based and CSI water-based sealers.

ChemSystems Solvent Seal 27 is a high quality, 100% acrylic, solvent-based breathable sealer designed to seal concrete and masonry surfaces. CSI Solvent Seal 27 will protect surfaces from water, dust, stains, and dirt. Solvent Seal 27 produces a high gloss finish when dry.

ChemSystems Helix Epoxy Bonder is a two-component water-based epoxy primer and moisture barrier. It is an excellent adhesion promoter between Helix cement-based overlay toppings and hard surface substrates. Helix Epoxy Bonder forms an impermeable membrane that acts as a moisture barrier and provides crack suppression properties. It is a slow cure product (24 hours) and is designed to be surface seeded with 90 mesh sand for optimum adhesion properties with any cement-based overlay.

ChemSystems Cemseal WB is a high quality pure acrylic water-based sealer designed to protect both interior and exterior concrete and masonry surfaces. CemSeal WB forms a tough water clear semi-gloss protective acrylic film that resists water, dirt and common day-to-day contamination at the same time eliminating concrete dusting. This product is a good choice for sealing all types of gray or colored concrete and masonry surfaces. It can be tinted using Helix water-based Tint Packs to achieve a translucent tinted sealer.

ChemSystems CSI Solvent Seal 23 - Gloss Spray Fast Dry (SPFD) is a high quality, solvent based acrylic sealer that meets VOC regulations of 400 g/l. It is designed to seal concrete, masonry, and stone surfaces, providing a gloss finish that will protect from water, dust, stains and dirt. It contains fast drying solvents that require the sealer to be spray applied when temperatures exceed 75 °F.

ChemSystems HBS High Gloss Sealer is a water based pure acrylic sealer suitable for decorative concrete, gray concrete, stone, brick, stucco, porous tile, and concrete counter tops. It has excellent blush resistance, as well as resistance to yellowing from UV exposure. This sealer provides a gloss finish to all concrete surfaces.

ChemSystems Silane 40 SB VX is a solvent-based, breathable, deep-penetrating, water repellent for concrete, masonry, and block. It protects by eliminating water intrusion which keeps harmful chemicals like deicing salts from entering the slab. Keeping water from entering the material also reduces issues related to freeze/thaw cycles and keeps rebar rust free.

ChemSystems CSI Solvent Seal 23 - 100 VOC Gloss is a high quality, solvent-based acrylic sealer that meets VOC regulations of 100 g/l. It is designed to seal concrete, masonry, and stone surfaces, providing a gloss finish that will protect from water, dust, stains, and dirt. It contains fast drying solvents that require the sealer to be spray applied when temperatures exceed 75 °F.

ChemSystems CSI Solvent Seal 18/ CE 22 is a high quality, 100% acrylic, solvent-based breathable sealer designed to seal concrete and masonry surfaces. CSI Solvent Seal 18/ CE 22 will protect surfaces from water, dust, stains and dirt. CSI Solvent Seal 18/ CE 22 produces a gloss finish when dry.