ChemSystems Silane 40 SB VX - Breathable

Knowde Enhanced TDS

Identification & Functionality

Chemical Family: Silanes
Product Type: Solventborne Coating
Technologies: Ready-to-Use Products
Product Families: Ready-to-Use Products — Paints & Coatings
Protective Coatings

Features & Benefits

Ready-to-Use Product Features: Breathable,
Chemical Resistant,
Freeze/Thaw Stability,
Water Resistant
Product Benefits: 40% Silane solvent based penetrating water repellant

Protects surfaces from de-icing salts and freeze/thaw damage.

The product does not alter the appearance of the surface after it cures

Prevents water from penetrating into the substrate and carrying damaging de-icing salts and other contaminants to the reinforcing steel.

Applications & Uses

Markets: Building & Construction,
Paints & Coatings
Applications: Building & Construction — Other Building & Construction Applications
Paints & Coatings — Other Paints & Coatings Applications
Application Method: Brush,
Roller,
Spray
Compatible Substrates & Surfaces: Concrete
Application: Cured should be a minimum of two weeks old: surface should be clean and dry. Use 3000 psi power washer to clean the surface. Remove oil and grease spots with concrete Clemons Cleaner Degreaser. Allow 24 hours to dry before sealing

Surface temperature should be between 20° F and 90° F. This product should be applied with an acetone-resistant pump sprayer. A brush or roller of the appropriate nap length can be used for areas where overspray is a concern. Enough material should be applied in a single application so that the surface remains wet for 3 minutes. Any pooled or puddled material should be moved to more porous areas after 3-5 minutes. Due to low viscosity, care should be taken during roller application to avoid puddling. Best results are obtained when the substrate is completely dry prior to application. Do not apply this material to surfaces previously coated. Care should be taken to ensure even coverage rate.

Properties

Regulatory & Compliance

Technical Details & Test Data

Coverage Rates: Coverage rates may vary depending on the texture, porosity and condition of the concrete, application method, and other local conditions.

Broomed Finish: 100 - 150 ft² per gallon

Smooth Finish: 200 - 400 ft² per gallon

Concrete Pavers: 100 - 150 ft² per gallon

*Very porous surfaces may require two applica

Packaging & Availability