Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Product Type
- Technologies
- Product Families
Features & Benefits
- Labeling Claims
- Ready-to-Use Product Features
- Key Features
- 100% solids - no solvents
- Room temperature cure
Applications & Uses
- Markets
- Cure Method
- Use and Cure Information
Mixing
- In order to achieve optimum performance, the same lot number of QSil 550LV A and QSil 550LV C should be used.
- QSil 550LV A and QSil 550LV C should be thoroughly mixed prior to catalyzation.
Mixing by hand:
Catalyze QSil 550LV A with QSil 550LV C at a 1:1 ratio by weight using a clean plastic or metal container of approximately 3 times the volume of the material to be mixed and mix by hand. Accurate weighing of all components, on a suitable scale, is essential for optimal product performance when mixing by hand. Mix until the material is uniform with no visible striations.
Mixing and dispensing with automatic equipment:
Use a mixing system that will properly mix the QSil 550LV A and QSil 550LV C at a 1:1 ratio by weight.
De-aeration
- Air trapped during mixing should be removed by vacuum at 29 inches of mercury. During the process, the material will expand, and intermittent evacuation may be required.
- Machine mixed material does not normally need to be de-aired.
Properties
- Flame Rating
- Typical Properties
- Thermal Properties
- Catalyzed Properties
- Electrical Properties
- Cured Properties
- Uncatalyzed Properties
- Note
* Gel time is defined as the time required for the material to become a solid or a semi-solid.
| Value | Units | Test Method / Conditions | |
| Mix Ratio | 1:1 | — | — |
| Mixed Viscosity | 1300.0 | cps | — |
| Shore A Hardness | 62.0 | — | Durometer |
| Dielectric Strength | 500.0 | V/mil | — |
| Volume Resistivity | 1.47x10¹⁵ | ohm-cm | — |
| Value | Units | Test Method / Conditions | |
| Thermal Conductivity** | approx. 0.37 | W/mK | — |
| Useful Temperature Range | - 55 - 204 | °C | — |
| Value | Units | Test Method / Conditions | |
| Gel Time* (at 25 °C) | 110.0 | Minutes | — |
| Mix Ratio | 1:1 | — | — |
| Value | Units | Test Method / Conditions | |
| Dissipation Factor | 0.001 | — | — |
| Dielectric Constant (at 1,000Hz) | 3.12 | — | — |
| Volume Resistivity | 1.47 x 10¹⁵ | Ω.cm | — |
| Value | Units | Test Method / Conditions | |
| Shore A Hardness | 62.0 | — | Durometer |
| Tensile Strength | 450.0 | psi | — |
| Elongation | 90.0 | % | — |
| Tear | 20.0 | ppi | — |
| Youngs Modulus | 450.0 | psi | — |
| UL 94 V-0 | 3.0 | mm | — |
| Mixed Viscosity | 1300.0 | cps | — |
| Value | Units | Test Method / Conditions | |
| Appearance (QSil 550LV A) | Beige | — | — |
| Viscosity (QSil 550LV A) | 1300.0 | cps | — |
| Specific Gravity(QSil 550LV A) | 1.41 | — | — |
| Appearance (QSil 550LV C) | Black | — | — |
| Viscosity (QSil 550LV C) | 1300.0 | cps | — |
| Specific Gravity(QSil 550LV C) | 1.41 | — | — |
Regulatory & Compliance
- Certifications & Compliance
Storage & Handling
- Shelf Life
- 24 Months
- Storage and Shelf Life
- This product is best when used within 24 months from date of manufacture. See product label and/or CoA for specific "Use By Date".
- Product should be stored in its original, unopened container in an environment that does not exceed 38 °C (100 °F).
- Storage beyond the date specified on the label does not necessarily mean that the product is no longer usable. In this case, the properties required for the intended use should be checked for quality assurance reasons.