Products

CHT Group SE3000 is a 2-component silicone elastomer system specially designed for electronic potting and encapsulation applications. It offers good protection against chemicals, environmental contamination, mechanical shock, vibration, and impact damage. It can be employed in areas where low flammability is a prerequisite. The cured elastomer can be repaired. The component parts have relatively low viscosities and are readily mixed, either by hand or machine.

CHT Group QSil 550LV A&C is a 100% silicone solids elastomer designed for electronic potting applications. This addition-cure potting elastomer is a two-component system that offers a hard, thermally conductive, low-modulus material that is readily repairable. It cures at room temperature.

CHT Group TufGel 336 is one of a family of soft, adherent, silicone elastomeric gels designed for the encapsulation and protection of electronic components. It is a low-viscosity, two-component system that is readily mixed in a 1:1 ratio. It is used to provide protection from vibration, thermal or mechanical shock, water, and many other environmental contaminants. This product has excellent dielectric properties.

CHT Group QGel 311 is a clear, soft, moderately cross-linked, general-purpose, addition-cure silicone gel polymer. This silicone gel provides protection from moisture, vibration, thermal, or mechanical shocks. It is a fast-curing, inhibition-resistant gel that is commonly used in a variety of electronic applications.

CHT Group QSil 216 is a transparent and colorless silicone formulation that is ideal for optical applications. Its viscosity profile enables excellent flow around components, and it is excellent for potting complex parts. The chemical composition results in a cured product that is hydrolytically stable as well as reversion-resistant. The silicone elastomer provides electrical insulation and physical shock resistance for components and enables environmental protection.

CHT Group QSil 553 is a 2-component silicone elastomer system specially designed for electronic potting and encapsulation applications. It offers good protection against chemicals, environmental contamination, mechanical shock, vibration, and impact damage. It can be employed in areas where low flammability is a prerequisite. The cured elastomer can be repaired. The component parts have relatively low viscosities and are readily mixed, either by hand or machine.

CHT Group QGel 311UV is a clear, soft, moderately cross-linked, special-purpose, addition-cure silicone gel polymer. This silicone gel provides protection from moisture, vibration, thermal, or mechanical shocks. It is a fast-curing, inhibition-resistant gel with a UV tracer for easy identification.

CHT Group QSil 220 is a transparent and colorless silicone formulation that is ideal for optical applications. Its viscosity profile enables excellent flow around components, and it is excellent for potting complex parts. The chemical composition results in a cured product that is hydrolytically stable as well as reversion-resistant. The silicone elastomer provides electrical insulation and physical shock resistance for components and enables environmental protection.

CHT Group TufGel 330 is one of a family of soft, adherent, silicone elastomeric gels designed for the encapsulation and protection of electronic components. It is a low-viscosity, two-component system that is readily mixed in a 1:1 ratio. It is used to provide protection from vibration, thermal or mechanical shock, water, and many other environmental contaminants. This product has excellent dielectric properties.

CHT Group QSil 573 is a 100% silicone solid elastomer designed for electronic potting applications. This addition-cure potting elastomer is a two-component system that offers a hard, thermally conductive, low-modulus material that is readily repairable. This product has excellent thermal conductivity.

CHT Group QSil 214 is a transparent and colorless silicone formulation that is ideal for optical applications. Its viscosity profile enables excellent flow around components, and it is excellent for potting complex parts. The chemical composition results in a cured product that is hydrolytically stable as well as reversion-resistant. The silicone elastomer provides electrical insulation and physical shock resistance for components and enables environmental protection.

CHT Group QSil 223 is a transparent and colorless silicone formulation that is ideal for optical applications. Its viscosity profile enables excellent flow around components, and it is excellent for potting complex parts. The chemical composition results in a cured product that is hydrolytically stable as well as reversion-resistant. The silicone elastomer provides electrical insulation and physical shock resistance for components and enables environmental protection.

CHT Group QSil 559 is a 100% silicone solid elastomer designed for electrical potting applications. This addition-cure potting material is a two-component system that has a long gel time. It offers a hard, thermally conductive, low-modulus material that is readily repairable.

CHT Group AS1740 is part of a range of high-performance RTVs. It is a neutral cure silicone sealant specifically designed to meet the physical, chemical, and temperature resistance requirements of MIL-A-46146B. It features exceptional physical properties and is compatible with many sensitive substrates, including copper, brass, steel, aluminum, and FR4, making this an ideal option for many electronic applications where high performance is paramount. The alkoxy cure system produces a silicone sealant with excellent adhesion to most common substrates.

CHT Group QSil 58 is a high-temperature, self-leveling, two-component silicone material that is primarily used for potting applications. The two applicable catalysts are 0.5% DBT by weight and 10% deep-section catalyst by weight. The 0.5% catalyst level can be increased or decreased to obtain the desired cure speed. Cure speed can be accelerated by adding DBT catalyst in 0.1% increments. This can be catalyzed with a 10% deep-section catalyst for applications requiring a deeper cure. The material can also be vulcanized at temperatures up to 70°C to increase cure speed.

CHT Group SilSo Clear 21002 is a transparent and colorless silicone formulation that is ideal for optical injection molding applications. Its viscosity profile enables excellent flow around components, and it is excellent for potting complex parts. The chemical composition results in a cured product that is hydrolytically stable as well as reversion-resistant. The silicone elastomer provides electrical insulation and physical shock resistance for components and enables environmental protection.

CHT Group AS1821 is a non-corrosive, neutral-cure, 1-part, RTV (Room Temperature Vulcanizing) silicone adhesive sealant. It is one in a range of acetone-cure products that are solvent-free. It exhibits excellent primerless adhesion to many substrates and cures rapidly at room temperature to form a tough rubber when in contact with atmospheric moisture. This product will not corrode copper or its alloys and is suitable for use with electronic components.