Products

Cola®Quat ISD is an effective, anionic compatible quaternary conditioner. It is based on isostearic acid and is sold in an anhydrous, inert solvent. It is approximately 75% active and can be used in a variety of household and personal care products to add lubricity and antistatic properties. Clear, conditioning shampoos and body cleansers can be formulated with Cola®Quat ISD, along with hand cleaners other bath products. Cola®Quat ISD may also be used as an antistatic agent. In shampoos and body wash products, use 0.3 to 1.0% depending on the degree of conditioning desired. In hair conditioner products, about 0.5 to 1.0% are typical use levels.

Cola®Mid CMA is a 1:1 coconut monoethanolamide supplied as a easy-to-handle, flake for use as a thickener and foam stabilizer in personal care products. It is very mild to the skin and eyes, and is a good viscosity booster and foam stabilizer. This product provides a good, smooth after-feel.

Poly Suga®Mulse D6 is a PEG-free, nonionic fragrance solubilizer made from 100% biobased raw materials. It is hydrophilic, freely soluble or dispersible in water, and soluble in varying degrees in organic liquids. Poly Suga®Mulse D6 is used for oil-in-water (O/W) emulsification, dispersion or solubilization of fragrances and all types of oils. It is compatible with nonionic, cationic and anionic surfactants and is effective in systems with relatively high levels of electrolyte, acid, or base.

Cola®Lux SO provides good detergency, exceptionally high foaming, and viscosity forming properties. It can be formulated with anionic, nonionic, and cationic materials. This product is recommended for shampoos, bubble baths, hand soaps, air conditioners, cream rinses, creams and lotions, shaving creams, household products, and industrial and institutional products.

Cola® Lipid DCCA is a plant-derived multifuctional phospholipid, combining gentle cleaning, mildness and excellent substantivity with broad spectrum antimicrobial activity. It can be utilized to minimize preservative requirements or to formulate self-preserved systems. Cola® Lipid DCCA is compatible with all surfactant types and is ideal for use in personal care cleansers where mildness and antimicrobial properties are of importance.

Lauramidopropyl Hydroxysultaine​. Cola®Teric LMHS is compatible with anionic, nonionic, amphoteric and cationic surfactants. When compared to lauramidopropyl betaine, Cola®Teric LMHS exhibits excellent dispersing, emulsifying, antistatic characteristics and better flash foam and viscosity building capacity with lauryl sulfates and alpha olefin sulfonates. Cola®Teric LMHS is stable over a broad pH range in both hard and soft water with excellent lime soap dispersing properties. Cola®Teric LMHS is fully biodegradable.

Cola®Mate LA-40 is a very light colored, mild sulfosuccinate surfactant derived from natural lauryl alcohol. It is made from lauryl alcohol of vegetable origin, making the overall product more than 45% vegetable derived. This product is sulfate free, ethoxylate free, and 1,4-dioxane-free, making it an ideal product for natural based, sulfate-free formulations. It provides very dense, voluminous foam when used to formulate personal cleansers.

Poly Suga®Mulse D9 is a PEG-free, nonionic fragrance solubilizer made from 100% biobased raw materials. It is hydrophilic, freely soluble or dispersible in water, and soluble in varying degrees in organic liquids. Poly Suga®Mulse D9 is used for oil-in-water (O/W) emulsification, dispersion or solubilization of fragrances and all types of oils. It is compatible with nonionic, cationic and anionic surfactants and is effective in systems with relatively high levels of electrolyte, acid, or base.

Cola®Mate OPV is a vegetable derived sulfosuccinate half ester of oleamide MIPA. It is a very mild surfactant to both eye and skin. When blended with high foaming anionic surfactants, this product will reduce irritation without significantly reducing foam. Cola®Mate OPV also responds readily to viscosity builders, such as, amides, betaines and salts.

Cola®Teric 2C is a coco imidazoline-derived dicarboxylic acid amphoteric. It is one of mildest amphoteric surfactants of its class, provides a moderate lather and cleans without removing dermal lipids from the skin to give a rich, conditioning effect. Cola®Teric 2C is stable over a wide pH range and useful for institutional cleaners. Cola®Teric 2C is ideal for use in a wide range of cosmetic applications, including shampoos, hand and facial cleaners, baby wipes, and bath products.

Cola® Lac 426 is an amido amine lactate used in the formulation of conditioners in hair and skin care products. Unlike quaternary ammonium cationics, Cola® Lac 426 rinses quickly and prevents tangling without reducing foam. Cola® Lac 426 is also compatible with anionic surfactants and may be used in formulations for clear shampoo and skin cleansers.

Cola®Nol 14 is a PEG-free distilled polyglycerol ester based on vegetable oleic acid. It is an excellent emulsifier enabling water and oil to mix with good heat and cold stability. Cola®Nol 14 is compatible with all kinds of cosmetic oils and active ingredients with very pleasant application properties.

Colonial 18-S is fatty amido-functional tertiary amine in flaked form. It may be neutralized with a variety of acids to form a cationic amine salt. This product is produced from a high purity vegetable-derived grade of stearic acid.Colonial 18-S is useful as the primary ingredient for a conditioner, finishing rinse, or cream rinse. Amine salts offer a major advantage over quaternary ammonium compounds in that they can more easily be rinsed from the hair and reduce conditioner buildup. Blended with a proper co-emulsifier, both opaque or pearly conditioner formulations can be commercially developed.

Cola®Quat HRC is a quaternary designed to give exceptional performance in hair and skin products. It has been found through extensive testing, to be an excellent hair rinse conditioner. This product is a superior product when compared to other quaternaries such as Quaternium 16, stearyl dimethyl benzyl ammonium chloride, and polymers based on PVP and cellulosics.

Cola®Teric HLA and Cola®Teric HFA are high foaming amphoteric surfactants that provide outstanding hydrotroping properties in high electrolyte systems. Additionally, they contribute to wetting, detergency, and rinsibility. These high foaming amphoterics produce a stable, slow draining, dense foam, and is ideally suited for use in household and industrial cleaners, mild personal care cleansers, and oilfield related foamers.

Cola®Teric CA-35 is a high foaming amphoteric surfactant with a low toxicity profile, making it suitable for a wide range of applications. It produces high foam and dense lather. This product is recommended for liquid soaps, shampoos, car washes, and foaming caustic cleaners.

Cola®Moist 300P is a polymeric, highly ionized water-soluble compound that enhances water-binding structures. It is hygroscopic at all humidities, attracting and binding water extremely effectively, and provides a higher humidity protective gradient to enhance moisturization on both skin and hair. Its hydrating properties limit water evaporation and serve to retain moisture. Its performance benefits are due to both strong ionic binding and hydrogen bonding within the humectant film matrix.

Cola®Mate DSLS is a very mild, nearly colorless, sulfosuccinate derived from a three mole ethoxylated lauryl alcohol. It provides excellent foam properties which can be enhanced by blending with sodium laureth sulfate. The combination of these two surfactants provides a product that is mild to both skin and eye, has good foam performance, and improves viscosity response.

Cola®Moist 200 is a highly ionized water soluble compound that enhances water bonding structures. It is highly hygroscopic at all humidities, attracting and binding water extremely effectively, and provides a higher humidity protective gradient on both skin and hair, to enhance miniaturization. This product is especially recommended for skin care, hair care, sun care, health care, and makeup products.

Cola®Quat CBC is a conditioning concentrate that offers a high quality conditioner in an easy, single-step manufacturing process. Cola®Quat CBC is shipped in a pastille form and ready to use, requiring only dispersingin hot water with any preservatives, fragrances and dyes of the formulator’s choice. Cola®Quat CBC provides conditioning, improved wet combability, and may be blended with other additives to develop customized products for specific audiences, ranging from mass market to salon-type conditioners.

Cola®Liquid SCMPA is a easy-to-use liquid cold-mix amide blend that is betaine-free. No heating is required for your formulation – simply use it as you would any liquid ingredient at room temperature into clear products. This product can also be used to solubilize fragrances into formulations. Cola®Liquid SCMPA boosts and stabilizes foam in a wide variety of personal care products and quickly builds viscosity with sodium chloride.

Cola®Teric COAB is a high foaming amphoteric surfactant useful in personal care and industrial applications. Of the Cola®Teric line, this product has the highest overall foam has, but it the least stable and has the quickest flash foam.

Cola®Lipid ST is a multifunctional, natural triglyceride phospholipid similar to phospholipids that occur naturally in the body. It can be used in a variety of personal care products. This product is non-irritating to the eyes and skin, reduces irritation of anionic activity, and repairs damaged skin and hair.

Cola®Teric LHS is a fatty alkyl amphoteric surfactant in the sultaine class. It is a high foaming, biodegradable surfactant that is compatible with virtually all other surfactants. It demonstrates excellent stability in both extreme acid and alkaline formulations and very stable in both acid and alkali formulations and can be solubilized at 2-3% in 30- 40% caustic soda solutions. Cola®Teric LHS is a unique foaming surfactant successfully used in sulfate-free and PEG-free formulations in industrial, household and hair and body care applications.

Cola®Fax CPE-K is an excellent water-soluble emulsifier designed to be used as a co-emulsifi er with low HLB surfactants. Cola®Fax CPE-K is completely non-irritating to skin. Cola®Fax CPE-K is easily dissolved into the hot water phase during emulsion processing. Cola®Fax CPE-K, at low use concentrates, will enhance the stability of any emulsion and thicken creams and lotions. It can replace TEA-stearate in most preparations. Cola®Fax CPE-K is ideally suited for use in many dermatological and personal care products as an oil-in-water emulsifier providing a silky powdery after feel.

Cola®Quat PDQ is a high molecular weight polyquat based on naturally derived dilinoleic acid from a natural source of saffl ower oil. This unique molecule has no detrimental effect on viscosity when used with sulfates in shampoos and body washes. It has the featured benefit of conditioning due to the presence of twin linoleyl groups. Cola®Quat PDQ is a high active liquid that is free of monomers and is high molecular weight.

Cola®Lux O2 is an amine oxide that provides excellent viscosity building, foam stability and moderate foam boosting. Cola®Lux O2 is compatible with most surfactants and will not hydrolyze in acid or alkaline systems due to the absence of amide or ester groups. Used in low concentrations, Cola®Lux O2 provides a silky feel to body washes, liquid hand soaps and other skin cleansers. Cola®Lux O2 may also function as a viscosity builder and an anti-static agent. Cola®Lux O2 is shipped preservative-free.

Cola®Mid CMPA is a 1:1 coconut monoisopropanolamide that is 100% MEA and DEA free. It provides foam stability (with emollient and anti-corrosive effects) and enhanced viscosity response. Featuring very low residual reactants and by-products, Cola®Mid CMPA is especially suitable for more “natural” formulations and stable at neutral, alkaline and acidic systems.

Cola®Mid C is an all-purpose coconut diethanolamide that provides foam boosting, foam stabilization, and thickening properties in a variety of personal care formulations. It is supplied as a clear amber liquid.

Cola®Teric J49 contributes to mild cleansing, viscosity control, anti-irritation, substantivity, and high lathering characteristics in personal care preparations. This product is ideally suited for use in skin cleansers, shampoos, and bath products.

Colonial Monolaurin is a unique, multifunctional compound made from lauric acid obtained from sustainable coconut oil. When compared with standard “monoglycerides,” Colonial Monolaurin has multiple positive characteristics not typically found in a single product and offers elegance and utility to personal care and pharmaceutical products.

Cola®Mid AME has unique antistatic, moisturizing and humectant properties. It is a good choice for both skin and hair conditioning products. For shampoos, superior conditioning can be built-in allowing for excellent wet combing properties. This product leaves hair with good manageability, reduces “fly away” and provides sheen to hair. It is also a suitable conditioner for body washes and lotions.

Cola®Teric CBS is an amphoteric surfactant in the sultaine class. It exhibits outstanding surface activity, wetting, foaming, and compatibility in a wide variety of applications. Due to its amphoteric nature, this product is compatible with cationic, anionic, and nonionic surfactants. The compatibility and stability of formulations containing Cola®Teric CBS are maintained over a broad pH range.

Cola®Mulse PCMX is a 100% active, non-ionic product designed to quickly incorporate chloroxylenol (PCMX) into liquid hand soaps for anti-microbial claims. PCMX is a highly ef-fective broad-spectrum antimicrobial and preservative used to inhibit bacteria, fungi and mold growth. The unique combination of PEG-8 Laurate and Laureth-4 permits Cola®Mulse PCMX to be easily cold mixed into any fi nished product. Unlike other concen-trates, Cola®Mulse PCMX does not contain any drying alcohol and does not have a fl ashpoint. The ingredients used to solubilize the PCMX can also help incorporate fragrances in highly anionic formulas.

Cola®Teric 1C is a coconut oil derived alkyl imidazoline monocarboxylic acid amphoteric, provides wetting and detergency in textile and hard surface cleaners. For personal care applications, it contributes mild cleansing, counter-irritancy, light conditioning, and high foaming properties. This product is ideal for use in fine fabric laundering and a wide range of personal care products.

It is a 100% active, nonionic product designed to incorporate oil-based fragrances in anionic water-based formulations. By pre-blending this product with a fragrance of choice, the formulator can incorporate large amounts of oil-based fragrances or difficult fragrances into anionic water-based formulation while maintaining the clarity and performance characteristics of the finished product.