Products

Cola®Liquid DC is a DEA-free liquid non-ionic surfactant derived from triglyceride oil. Cola®Liquid DC provides excellent foam boosting, viscosity building and foam stabilizing properties. It will readily solubilize most fragrances and essential oils into anionic systems. The product is liquid and very mild to eyes and skin. Cola®Liquid DC can be used in any application where traditional alkanolamide surfactants have been used. Cola®Liquid DC will also boost and maintain foam levels over non-amide systems and other personal care formulations. Cola®Liquid DC combines the best properties of the coco MEA amide and coco DEA amide into one product. The use level for Cola®Liquid DC is going to be typical of those for similar alcohol amide surfactants, generally in the range of 1% to 5% in personal care products.

Colonial SCS is a sodium coco-sulfate derived from 100% natural coconut oil. In the needle form, the product is free flowing and disperses easily in water. Heat is required to fully dissolve the product. Colonial SCS provides excellent lather, thickening and conditioning properties. It is also an excellent replacement for most anionic surfactants in personal cleansing products.

Cola®Lux SO provides good detergency, exceptionally high foaming, and viscosity forming properties. It can be formulated with anionic, nonionic, and cationic materials. This product is recommended for shampoos, bubble baths, hand soaps, air conditioners, cream rinses, creams and lotions, shaving creams, household products, and industrial and institutional products.

Cola®Mate DSLS is a very mild, nearly colorless, sulfosuccinate derived from a three mole ethoxylated lauryl alcohol. It provides excellent foam properties which can be enhanced by blending with sodium laureth sulfate. The combination of these two surfactants provides a product that is mild to both skin and eye, has good foam performance, and improves viscosity response.

Cola®Lux O2 is an amine oxide that provides excellent viscosity building, foam stability and moderate foam boosting. Cola®Lux O2 is compatible with most surfactants and will not hydrolyze in acid or alkaline systems due to the absence of amide or ester groups. Used in low concentrations, Cola®Lux O2 provides a silky feel to body washes, liquid hand soaps and other skin cleansers. Cola®Lux O2 may also function as a viscosity builder and an anti-static agent. Cola®Lux O2 is shipped preservative-free.

Cola®Liquid SCMPA is a easy-to-use liquid cold-mix amide blend that is betaine-free. No heating is required for your formulation – simply use it as you would any liquid ingredient at room temperature into clear products. This product can also be used to solubilize fragrances into formulations. Cola®Liquid SCMPA boosts and stabilizes foam in a wide variety of personal care products and quickly builds viscosity with sodium chloride.

Cola® Det DEF-25 is an anionic/nonionic/amphoteric surfactant blend. This DEA-free synergistic blend of surfactants provides great foaming and viscosity building in an easy-to-use blend. Upon dilution, Cola® Det DEF-25 can be used in a variety of applications such as shampoos and bath products with a suggested usage of 10% to 40%.

Cola®Mid LMPA is a refined monoisopropanolamide, suitable for use in cosmetic and household formulations. Cola®Mid LMPA offers excellent performance for building viscosity and stabilizing foam. With very low residual free amine, Cola®Mid LMPA is an appropriate replacement for Diethanolamine (DEA) or Monoethanolamine (MEA). There is no DEA present in Cola®Mid LMPA.

Cola®Teric CDB is derived from natural fatty acids. It is a mild, unique secondary surfactant that can improve the viscosity response of sulfate-free and conventional anionic surfactant systems. Cola®Teric CDB is formulated for cold processing and easy handling and can also be used as a primary surfactant, foam booster or static control agent. Cola®Teric CDB is compatible with anionic, nonionic and cationic surfactants.

Cola®Teric LMB is a high foaming amphoteric surfactant that displays higher foaming and viscosity building properties versus traditional cocamidopropyl betaines in shampoos, skin cleansers, and other mild personal care products. This product foams well, even in high electrolyte solutions. In cosmetic formulations, it shows a marked increase in viscosity along with increased flash foam when formulated with anionic surfactants. It is also valuable in bubble bath formulations where mildness, lime soap dispersing properties, and viscosity building characteristics are necessary.

Cola®Mid AME has unique antistatic, moisturizing and humectant properties. It is a good choice for both skin and hair conditioning products. For shampoos, superior conditioning can be built-in allowing for excellent wet combing properties. This product leaves hair with good manageability, reduces “fly away” and provides sheen to hair. It is also a suitable conditioner for body washes and lotions.

Cola®Mid C is an all-purpose coconut diethanolamide that provides foam boosting, foam stabilization, and thickening properties in a variety of personal care formulations. It is supplied as a clear amber liquid.

Cola®Mate LA-40 is a very light colored, mild sulfosuccinate surfactant derived from natural lauryl alcohol. It is made from lauryl alcohol of vegetable origin, making the overall product more than 45% vegetable derived. This product is sulfate free, ethoxylate free, and 1,4-dioxane-free, making it an ideal product for natural based, sulfate-free formulations. It provides very dense, voluminous foam when used to formulate personal cleansers.

Cola®Det EQ-19 is a sulfate-free concentrated blend of mild surfactants useful in formulations of alpha and beta-hydroxyl acid cleansers. It contains surfactants that are hydrolytically stable under moderately acid conditions. This product is easily formulated for facial cleansers, body washes and other foaming washes.

Cola®Teric COAB is a high foaming amphoteric surfactant useful in personal care and industrial applications. Of the Cola®Teric line, this product has the highest overall foam has, but it the least stable and has the quickest flash foam.

Cola®Mid HPC has been developed specifically to increase flash foam. At concentrations of 1 - 3%, in a variety of cosmetic products such as shampoos, bubble baths, bath oils, etc. A significant increase in flash foam will be noted. Cola®Mid HPC also augments the foam boosting and foam stabilization properties of other amides without significantly affecting viscosities. Cola®Mid HPC is an effective emulsifier and solubilizing agent in cosmetic creams, lotions and other toiletry products. As a result of these functions, it can also be used as a viscosity control agent in these applications.

Cola®Lux LO is an amine oxide that provides good detergency, exceptionally high foaming, and viscosity forming properties. This product is recommended for shampoos, handsoaps, bath products, creams and lotions, hair conditioners, dishwashing detergents, cleansers, and hard surface cleansers.

Cola®Lux MO provides good detergency, exceptionally high foaming, and viscosity forming properties. It can be formulated with anionic, nonionic, and cationic materials. This product is recommended for shampoos, bubble baths, hand soaps, air conditioners, cream rinses, creams and lotions, shaving creams, household products, and industrial and institutional products.

Cola®Mid CMPA is a 1:1 coconut monoisopropanolamide that is 100% MEA and DEA free. It provides foam stability (with emollient and anti-corrosive effects) and enhanced viscosity response. Featuring very low residual reactants and by-products, Cola®Mid CMPA is especially suitable for more “natural” formulations and stable at neutral, alkaline and acidic systems.

Cola® Det EQ-20 is a sulfate-free concentrated blend of mild surfactants useful in formulations of alpha and beta-hydroxyl acid cleansers. It contains surfactants that are hydrolytically stable under moderately acid conditions. This product is easily formulated for facial cleansers, body washes and other foaming washes. A gentle, high-quality, and luxurious cleanser may be formulated as easily as preparing a dilution consisting of Cola® Det EQ-20, an alpha hydroxyl acid, water and a fragrance.

Cola®Mid LMA is a methyl ester based amide and is a very effective foam stabilizer and thickening agent for anionic based cleansers. It also functions as a foam booster and a hair conditioning agent. This product is recommended for shampoos, hand soaps, and bath products.

Cola®Teric J49 contributes to mild cleansing, viscosity control, anti-irritation, substantivity, and high lathering characteristics in personal care preparations. This product is ideally suited for use in skin cleansers, shampoos, and bath products.

Cola®Liquid DM is a Myristamide DIPA non-DEA substitute for Myristamide DEA. Colonial Chemical’s Cola®Liquid products consist of completely liquid, consumer acceptable non-DEA amides that perform like traditional alkanolamide surfactants. Cola®Liquid DM can be used in any application where traditional alkanolamide surfactants have been used without reformulation. Cola®Liquid DM is effective in a wide variety of personal care products.

Cola®Teric 2C-LV is a coco imidazoline-de- rived dicarboxylic acid amphoteric. Cola®Teric 2C-LV is a low viscosity process modification of Cola®Teric 2C that allows for handling without the need for heat and permits cold mix formulations - and easier to empty from containers. It is more versatile and tolerant of other additives permitting greater formulation latitude. Cola®Teric 2C-LV is ideal for use in a wide range of cosmetic applications.

Cola®Mid LM-73 is a mixed dimethanolamide designed to provide optimum viscosity building properties, while exhibiting good, dense foaming properties and foam stability. It also exhibits lubricity and conditioning characteristics and is an excellent emulsifier for various oils. This product is useful in bath gels, gel shampoos, liquid soaps, and facial cleansers.

Cola®Mid CMA is a 1:1 coconut monoethanolamide supplied as a easy-to-handle, flake for use as a thickener and foam stabilizer in personal care products. It is very mild to the skin and eyes, and is a good viscosity booster and foam stabilizer. This product provides a good, smooth after-feel.

Cola®Mate OPV is a vegetable derived sulfosuccinate half ester of oleamide MIPA. It is a very mild surfactant to both eye and skin. When blended with high foaming anionic surfactants, this product will reduce irritation without significantly reducing foam. Cola®Mate OPV also responds readily to viscosity builders, such as, amides, betaines and salts.

Cola®Teric STA is an amphoteric surfactant that is useful in personal care products as a viscosity builder in cosmetics, a hair conditioning agent and a foam booster. It also features antistatic and softening effects on animal, cellulose and synthetic fabrics in household cleaners. Cola®Teric STA is used in polishes as an emulsifier and as a dispersant and viscosity builder in a variety of household and industrial products. It is non-yellowing.

Colonial AOS-40 is a pale yellow to light amber aqueous solution of sodium C14-16 alpha olefin sulfonate. Colonial AOS-40 combines the advantages of high foaming power, good emulsification, mildness to the skin, and excellent lime soap dispersion to give the formulator maximum flexibility in the preparation of light and heavy-duty cleaners. It is also suitable for use in acidic formulations such as those containing alpha hydroxyl acids or salicylic acid.