Products

Organomet Powder is designed to be used in small sumps, usually of 200 gallons or less to eliminate and prevent sulfide odors and to stabilize the pH of the in-use fluid. Organomet Powder also reduces the biofilm, a breeding ground for bacteria and fungi as well as neutralizes endotoxins released from the micro-organisms found in metalworking fluids. Safe and easy to use, Organomet Powder is the most effective way to control odors in any water-based system.

Aminol possesses excellent pH development and reserve alkalinity. Due to the chemical structure of the amine, Aminol will not contribute to ammonia blush.

Product D is a specially blended, highly effective, silicone-based anti-foam agent. Using a unique emulsifier system that was designed for metalworking applications, Product D has an extended sump life over other silicone based defoamers. It is used in very small quantities where foaming has become a problem.

A specially blended, highly effective, non-silicone oil-based anti-foam agent. It is used in very small quantities where foaming has become a problem.

A specially blended, highly effective, modified siloxane anti-foam agent that is effective at eliminating entrained air generated by high pressure coolant and washer systems. It is used in very small quantities where foaming has become a problem.

Microbicide CT is a high performance biocide for preserving metalworking and metal cleaning fluids. It has extremely broad-spectrum activity controlling bacteria, fungi, molds, and yeasts, while being compatible with most components in a formulation. Its very low use levels make Microbicide CT one of the most cost-effective biocides on the market.

Reductol is a blend of multifunctional fatty esters and soaps as well as surfactants designed to eliminate and prevent all types of coolant borne odors including sulfide and the musty odors created by shorter chained fatty acids. The specially formulated surfactants in Reductol also aid in the chemical breakdown of the biofilm, the nest where bacteria and fungi grow and breed, allowing it to be carried out with the chips or filtration equipment, thereby providing a bio-stable metalworking fluid. Reductol does not contain any heavy metals in the formulation and is easily waste treated by all current methods.

Cuprisan is a unique waste treatable copper complex designed to neutralize odor causing sulfides and reactive cations such as Al+3 and Fe+2. Cuprisan can be added tank-side or formulated into the coolant concentrate to provide long term odor control. Cuprisan works synergistically with biocides. When used with an Isothiazolinone-based microbicide, as little as 20% of the normal dosage is required to attain a complete kill and maintain a controlled fluid. Cuprisan will immediately eliminate and prevent the recurrence of most coolant-borne odors such as the common rotten egg smell and will aid in the stabilization of water-based cutting fluids.

Oxynul RP-1090 is a true solution rust preventative designed to provide short term indoor storage protection. It is safer and more economical than solvent based rust preventatives.

SDT odor eliminating tablets are designed to be used in small sumps, usually of 200 gallons or less to eliminate and prevent odors such as hydrogen sulfide, i.e. rotten egg odors. SDT also reduces the biofilm, a breeding ground for bacteria and fungi as well as neutralizes endotoxins released from the micro-organisms found in metalworking fluids. They contain no formaldehyde or formaldehyde-releasing chemicals of any kind. Safe and easy to use, SDT is the most effective way to control odors in any water-based system.