Products

Hercules EP 8A is an extreme pressure industrial gear oil fulfills the requirements of DIN 51517-3 for CLP type gear oils and U.S. Steel 224 performance. Hercules EP 8A offers good wear protection, safety against scuffing, aging resistance and a high thermal endurance. In addition, the product behave neutral towards conventional seals and bearing metals.

Aminol possesses excellent pH development and reserve alkalinity. Due to the chemical structure of the amine, Aminol will not contribute to ammonia blush.

Athena 220 is a anti-wear hydraulic oils formulated with highly refined paraffinic base oils. It provides excellent anti-wear protection, oxidation and corrosion inhibition as well as foam and aeration suppression. It have excellent demulsibility characteristics.

Vulcut 2000LC is a moderate to heavy duty lubricant formulated for the general machining and sawing of ferrous and non-ferrous metals. The high film strength of Vulcut 2000LC provides excellent lubrication characteristics without the need of chlorine, sulfur or phosphorous based additives. Based on renewable resources, Vulcut 2000LC is biodegradable and essentially non-toxic.

Honing Oil 8579 is a low viscosity neat cutting oil designed for honing and superfinishing of ferrous metals.

Vuldra 5580 is a water soluble drawing and stamping fluid based on natural and synthetic ester technology. It was designed to replace neat oils used to draw and stamp carbon and stainless steel alloys. The unique combination of boundary lubrication and non-chlorinated extreme pressure additives provides excellent surface finishes even in the most demanding operations. Vuldra 5580 is a clean product that is easily removed by both mildly alkaline and alkaline cleaners.

Orion 1025 is a high performance cutting and grinding fluid for ferrous alloys. This oil-rejecting fluid outperforms conventional coolants in difficult operations. Orion 1025 provides excellent bimetallic corrosion protection to keep parts and machine tools free from in-process rust. In hard or soft water, Orion 1025 forms a stable solution that will not foam. Orion 1025 is a clean fluid that runs with trouble-free dependability.

Cutrite 2100 is a semi-synthetic fluid for light to moderate duty machining and grinding of ferrous and non-ferrous alloys. Cutrite 2100’s emulsifier system is designed to remain stable even in very hard water and yet properly balanced to minimize foam in softer water. Cutrite 2100 is a clean product that provides dependable rancidity control when used in machining centers with individual sumps.

Athena 10 is a anti-wear hydraulic oils formulated with highly refined paraffinic base oils. It provide excellent anti-wear protection, oxidation and corrosion inhibition as well as foam and aeration suppression. It have excellent demulsibility characteristics.

Product D is a specially blended, highly effective, silicone-based anti-foam agent. Using a unique emulsifier system that was designed for metalworking applications, Product D has an extended sump life over other silicone based defoamers. It is used in very small quantities where foaming has become a problem.

Athena 15 is a anti-wear hydraulic oils formulated with highly refined paraffinic base oils. It provides excellent anti-wear protection, oxidation and corrosion inhibition as well as foam and aeration suppression. It have excellent demulsibility characteristics.

Pandora 22, formulated from select high-quality, low viscosity base oils and additives imparting excellent resistance to oxidation and corrosion, were developed specifically for the lubrication of high-speed and precision machine tool spindle bearings. They can also be used in some critical low pressure hydraulic and circulation systems where the appropriate viscosity grade is selected.

Hercules EP 2 is an extreme pressure industrial gear oil fulfills the requirements of DIN 51517-3 for CLP type gear oils and U.S. Steel 224 performance. Hercules EP 2 offers good wear protection, safety against scuffing, aging resistance and a high thermal endurance. In addition, the product behave neutral towards conventional seals and bearing metals.

Olympus 100 is a anti-wear hydraulic oils formulated with polyalphaolephin synthetic oils. It provides excellent anti-wear protection, oxidation and corrosion inhibition as well as foam and aeration suppression. It has excellent demulsibility characteristics. It is formulated to provide outstanding low- and high-temperature performance and equipment protection up to three times longer than comparable conventional products.

Synthetic EP 460 of synthetic industrial EP gear lubricants is specifically formulated to protect moderate to heavily loaded industrial gears and bearings. It provide excellent anti-wear and load carrying capability as well as strong rust inhibition and demulsibility performance. Synthetic EP 460 meets or exceeds the requirements of the industry standard U.S. Steel 224 and AGMA 250.04 EP gear lubricant specifications.

Vulgrind 7410 is a chlorine-free high performance grinding oil based on specially selected, thermally stable base oils. This allows Vulgrind 7410 to provide a consistent level of grinding performance as well as ensuring excellent wetting, lubrication and cooling.

Vanishing Oil 6370 is designed for light and medium duty blanking, stamping, very shallow draws and fin forming. The light oily film evaporates in 10 to 20 minutes, depending on the environment, leaving a clean surface. Vanishing Oil 6370 is compatible with all metals including aluminum, copper, stainless steel, brass, mild steel (1010, 1008) and silicone steel alloys.

Synthetic EP 150 of synthetic industrial EP gear lubricants is specifically formulated to protect moderate to heavily loaded industrial gears and bearings. It provide excellent anti-wear and load carrying capability as well as strong rust inhibition and demulsibility performance. Synthetic EP 150 meets or exceeds the requirements of the industry standard U.S. Steel 224 and AGMA 250.04 EP gear lubricant specifications.

Stearocling 600S Oils is formulated for the sliding ways of machine tools. It is formulated with high viscosity index base stocks combined with special extreme pressure friction modifiers that yield extremely low values in Cincinnati Milacron’s stick-slip test. As a result these oils are more stable to viscosity fluctuations and are able to overcome the slip-stick commonly associated with slow moving parts. Stearocling Way Oils also contain a package that eliminates the possibility of contamination through emulsification between the coolant and the way lube.

Athena 46 is a anti-wear hydraulic oils formulated with highly refined paraffinic base oils. It provides excellent anti-wear protection, oxidation and corrosion inhibition as well as foam and aeration suppression. It have excellent demulsibility characteristics.

Hercules EP 4 is an extreme pressure industrial gear oil fulfills the requirements of DIN 51517-3 for CLP type gear oils and U.S. Steel 224 performance. Hercules EP 4 offers good wear protection, safety against scuffing, aging resistance and a high thermal endurance. In addition, the product behave neutral towards conventional seals and bearing metals.

J-Cut 4560 is a high performance cutting oil designed for mist and spray lubricators. The non-chlorinated lubricants provide excellent surface finishes on even the most difficult metals without staining.

GHO-5555 is medium viscosity high performance shaving and hobbing oil. GHO-5555 contains an oiliness additive for additional performance, especially on draggy, soft metals. It is designed primarily for gear hobbing, form grinding, and gear cutting where pressurized coolant systems are used.

Hercules EP 1 is an extreme pressure industrial gear oil fulfills the requirements of DIN 51517-3 for CLP type gear oils and U.S. Steel 224 performance. Hercules EP 1 offers good wear protection, safety against scuffing, aging resistance and a high thermal endurance. In addition, the product behave neutral towards conventional seals and bearing metals.

Organomet Powder is designed to be used in small sumps, usually of 200 gallons or less to eliminate and prevent sulfide odors and to stabilize the pH of the in-use fluid. Organomet Powder also reduces the biofilm, a breeding ground for bacteria and fungi as well as neutralizes endotoxins released from the micro-organisms found in metalworking fluids. Safe and easy to use, Organomet Powder is the most effective way to control odors in any water-based system.

Athena 68 is a anti-wear hydraulic oils formulated with highly refined paraffinic base oils. It provides excellent anti-wear protection, oxidation and corrosion inhibition as well as foam and aeration suppression. It have excellent demulsibility characteristics.

Hercules EP 8 is an extreme pressure industrial gear oil fulfills the requirements of DIN 51517-3 for CLP type gear oils and U.S. Steel 224 performance. Hercules EP 8 offers good wear protection, safety against scuffing, aging resistance and a high thermal endurance. In addition, the product behave neutral towards conventional seals and bearing metals.

Oxynul RP-4820 is an oil dispersed rust preventive developed to provide long term protection in corrosive and high humidity environments. Oxynul RP-4820 also provides fingerprint suppression with a self-healing film. The thin oily residual film is easily cleaned using an alkaline cleaner.

Synthetic EP 220 of synthetic industrial EP gear lubricants is specifically formulated to protect moderate to heavily loaded industrial gears and bearings. It provide excellent anti-wear and load carrying capability as well as strong rust inhibition and demulsibility performance. Synthetic EP 220 meets or exceeds the requirements of the industry standard U.S. Steel 224 and AGMA 250.04 EP gear lubricant specifications.

A specially blended, highly effective, non-silicone oil-based anti-foam agent. It is used in very small quantities where foaming has become a problem.

Pandora 15, formulated from select high-quality, low viscosity base oils and additives imparting excellent resistance to oxidation and corrosion, were developed specifically for the lubrication of high-speed and precision machine tool spindle bearings. They can also be used in some critical low pressure hydraulic and circulation systems where the appropriate viscosity grade is selected.

Poseidon 320 is a of rust and oxidation inhibited oils formulated with highly refined paraffinic base oils. It provides excellent oxidation and corrosion inhibition as well as foam and aeration suppression. It has excellent demulsibility characteristics.

Reductol is a blend of multifunctional fatty esters and soaps as well as surfactants designed to eliminate and prevent all types of coolant borne odors including sulfide and the musty odors created by shorter chained fatty acids. The specially formulated surfactants in Reductol also aid in the chemical breakdown of the biofilm, the nest where bacteria and fungi grow and breed, allowing it to be carried out with the chips or filtration equipment, thereby providing a bio-stable metalworking fluid. Reductol does not contain any heavy metals in the formulation and is easily waste treated by all current methods.

Cutrite 2650 is a semi-synthetic fluid for light to moderate duty machining and grinding of ferrous and non-ferrous alloys. Cutrite 2650’s emulsifier system is designed to remain stable even in very hard water and yet properly balanced to minimize foam in softer water. Cutrite 2650 is a clean product that provides dependable rancidity control when used in machining centers with individual sumps.

Vuldra 8525 is a water soluble drawing and stamping fluid based on vegetable oil technology. It was designed to replace neat oils used to draw and stamp carbon and stainless steel alloys. The unique combination of boundary lubrication and non-chlorinated extreme pressure additives provides excellent surface finishes even in the most demanding operations. Vuldra 8525 is a clean product that is easily removed by both mildly alkaline and alkaline cleaners.

Oxynul RP-1950 is a highly effective all-purpose, water-soluble emulsion cleaner, designed to produce a soil-free surface and excellent medium term rust prevention. Oxynul RP-1950 is especially effective on freshly ground/machined surfaces, zinc phosphate and black oxide coatings.