Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Core Type
- Composite Materials Functions
- CAS No.
- 9002-86-2
- Technologies
- Product Families
Features & Benefits
Applications & Uses
- Applications
- Composites End Use
- Composites Processing Methods
- Processing Information
- Hand lamination / spray lay-up
- Vacuum infusion
- Resin injection
- Adhesive bonding
- Pre-preg processing (up to 140 °C, 285 °F)
- Thermoforming
- Recommended Applications
- Marine: hulls, decking, bulkheads, interiors superstructures
- Transportation: floors, ceilings, doors, interiors, partition walls, sidewalls
- Wind energy: rotor blades, covers, casings
- Aerospace: fuselage and wind components, kitchen trolleys, galleys
- Industrial: Covers, Containers, Tanks, Sporting goods, Tooling and Molds
Properties
- Physical Form
- Mechanical Properties
- Typical Properties
| Value | Units | Test Method / Conditions | |
| Standard Sheet Thickness (Plain) | 1/8 to 2 ¾ (3 to 75) | inch (mm) | — |
| Compressive Modulus | 13924 (96) | psi (MPa) | ISO 844 |
| Tensile Modulus | 20015 (138) | psi (MPa) | ASTM D1623 |
| Shear Modulus | 4206 (29) | psi (MPa) | ISO 1922 |
| Shear elongation at break | 32 | % | ISO 1922 |
| Standard Sheet Width (Plain) | 40.75 (1005) | inch (mm) | — |
| Standard Sheet Length (Plain) | 56.50 (2150) | inch (mm) | — |
| Shear Strength | 183 (1.26) | psi (MPa) | ISO 1922 |
| Tensile Strength | 412 (2.84) | psi (MPa) | ASTM D1623 |
| Compressive Strength | 236 (1.63) | psi (MPa) | ISO 844 |
| Density | 5 (80) | Lbs./cu.ft (Kg./m³) | ISO 845 |
| Value | Units | Test Method / Conditions | |
| Density Tolerance | ±10 | % | — |
| Water Absorption | max. 1 | % | — |
| Processing Temperature | 285 (140) | °F (°C) | — |