Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Fillers Included
- Polymer Name
- Plastics & Elastomers Functions
- Technologies
- Product Families
Features & Benefits
- Materials Features
- Key Features
It has excellent electrical properties with an impact strength considerably higher than Orlon-filled material. A special processing enables ID-50 to retain its excellent volume and surface resistance after prolonged exposure to elevated temperature and 100% humidity.
Applications & Uses
- Plastics & Elastomers Processing Methods
- Product Applications
The inherent strength of Dacron fibers makes this compound excellent for applications requiring high physical and/or electrical properties.
Properties
- Mechanical Properties
- Thermal Properties
- Electrical Properties
- Moisture Properties
- Processing Information (Molding)
| Value | Units | Test Method / Conditions | |
| Impact Strength (Izod Notched) | 3.0 | ft-Ib/inch | — |
| Flexural Strength | 10 - 12,000 | psi | — |
| Compressive Strength | 18 - 25,000 | psi | — |
| Tensile Strength | 3,500 -5,200 | psi | — |
| Value | Units | Test Method / Conditions | |
| Thermal Expansion (-40 °C to 100 °C) | 4.0x10⁻⁵ | °C | — |
| Heat Distortion Temperature (at 18.6 kg/cm²) | 260.0 | °C | — |
| Dimensional Stability | 0.06 | % | — |
| Value | Units | Test Method / Conditions | |
| Arc Resistance | 115.0 | seconds | — |
| Dielectric Strength (Kv Step-by-Step, Dry) | 360.0 | volts/mil | — |
| Dielectric Strength (Kv Step-by-Step, Dry) | 350.0 | volts/mil | — |
| Dielectric Breakdown (Dry) | 62.0 | Kv | — |
| Dielectric Breakdown (Wet) | 50.0 | Kv | — |
| Dielectric Constant (at 1 KHz/1 MHz, Dry) | 3.4/3.5 | — | — |
| Dielectric Constant (at 1 KHz/1 MHz, Wet) | 3.8/3.6 | — | — |
| Dissipation Factor (1KHz/1MHz, Dry) | 0.005 / 0.010 | — | — |
| Dissipation Factor (1KHz/1MHz, Wet) | 0.015/0.020 | — | — |
| Volume Resistance (as is) | min. 10¹⁰ | mega-ohms | — |
| Volume Resistance( at 70 °C, 30 Days 100% RH) | 10⁻⁴ | mega-ohms | — |
| Surface Resistance (as is) | min. 10¹⁰ | mega-ohms | — |
| Surface Resistance( at 70 °C, 30 Days 100% RH) | 10⁴ | mega-ohms | — |
| Value | Units | Test Method / Conditions | |
| Water Absorption (at 50 °C,48 hours) | 0.35 | % | — |
| Value | Units | Test Method / Conditions | |
| Specific Gravity | 1.39 | — | — |
| Bulk Factor | 3.0 | — | — |
| Molding Pressure | 500 - 8,000 | psi | — |
| Molding Temperature | 135 - 190 | °C | — |
| Mold Shrinkage | 0.007 - 0.009 | in / in | — |
Regulatory & Compliance
- Certifications & Compliance