Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Fillers Included
- Polymer Name
- Plastics & Elastomers Functions
- Technologies
- Product Families
Features & Benefits
- Materials Features
- Key Features
It has excellent mechanical strength and electrical properties, especially at high temperatures. It has passed NASA out-gassing tests.
Applications & Uses
- Markets
- Applications
- Plastics & Elastomers End Uses
- Product Applications
Used in electrical hardware applications such as underwater connectors and other insulation applications.
Properties
- Flame Rating
- Flame Rating
- UL 94 V0
- Mechanical Properties
- Thermal Properties
- Electrical Properties
- Test Parameter
- Moisture Properties
- Processing Information (Molding)
| Value | Units | Test Method / Conditions | |
| Flexural Strength | 19000 | psi | — |
| Flexural Modulus | 2.6 x 10⁶ | psi | — |
| Compressive Strength | 30000 | psi | — |
| Tensile Strength | 14000 | psi | — |
| Barcol Hardness | 65 - 75 | — | — |
| Impact Strength (Izod Notched) | 0.6 | ft-lb / inch | — |
| Value | Units | Test Method / Conditions | |
| Heat Deflection Temperature | 260 | °C | — |
| Glass Transition Temperature (Tg) | 165 | °C | — |
| Thermal Conductivity | 10 x 10⁻⁴ | cal/sec/cm²/°C/cm | — |
| Value | Units | Test Method / Conditions | |
| Arc Resistance | 186 | seconds | — |
| Volume Resistance | min. 10¹⁰ | Ohm - cm | — |
| Surface Resistance | 1 x 10¹⁵ | Ohm - cm | — |
| Dielectric Strength (Kv Step-by-Step, Wet) | 350 | volts/mil | — |
| Dielectric Breakdown (Step-by-Step, Wet) | 60 | Kv | — |
| Dielectric Constant (at 1 KHz, Wet) | 5.4 | — | — |
| Dissipation Factor (at 1KHz, Wet) | 0.011 | — | — |
| Dielectric Constant (at 1 MHz, Wet) | 4.7 | — | — |
| Dissipation Factor (at 1MHz, Wet) | 0.008 | — | — |
| Value | Units | Test Method / Conditions | |
| Linear Thermal Expansion (Alpha 1) | 29 x 10⁻⁶ | in/in/°C | — |
| Linear Thermal Expansion (Alpha 2) | 92 x 10⁻⁶ | in/in/°C | — |
| Value | Units | Test Method / Conditions | |
| Water Absorption (at 50 °C,48 hours) | 0.25 | % | — |
| Value | Units | Test Method / Conditions | |
| Specific Gravity | 1.8 | — | — |
| Bulk Factor | 2.0 - 5.0 | — | — |
| Molding Pressure | 500 - 8,000 | psi | — |
| Molding Pressure | 35 - 562 | Kg/cm² | — |
| Molding Temperature | 150 - 180 | °C | — |
| Molding Temperature | 302 - 356 | °F | — |
| Mold Shrinkage | 0.002 - 0.004 | In / In | — |
Regulatory & Compliance