Search
the marketplace
through 230,000 Chemicals and Raw Ingredients
through 8,000+ Supplier owned storefronts
company tower banner
Crafco Company Logo

Roadsaver 963 Gray Sealant

1 of 13 products in this brand
Crafco RoadSaver 963 Gray Sealant is a gray colored, hot applied, single component, elastically modified composition of non-asphaltic ingredients and modifiers used to fill cracks and joints in asphalt and Portland cement concrete pavements. RoadSaver 963 Gray Sealant is supplied in powder/granular form in meltable bags which when melted and properly applied forms an adhesive and flexible compound that resists cracking in the winter and is resistant to flow at summer temperatures. RoadSaver 963 Gray Sealant is used in highway, street, and airfield pavements where the gray color is desired.

Product Type: 1K (1 component) Sealant, Hot Melt Sealant

Compatible Substrates & Surfaces: Concrete

Technical Data SheetSafety Data Sheet
  • TypeDocument Name
View All Documents

Knowde Enhanced TDS

Identification & Functionality

Product Type

1K (1 component) Sealant,

Hot Melt Sealant

Technologies

Ready-to-Use Products

Product Families

Ready-to-Use Products — Adhesives & Sealants

Caulks & Sealants

Features & Benefits

Labeling Claims

VOC-free

Ready-to-Use Product Features

Crack Resistant,

Elastomer Modified,

Flexible

Applications & Uses

Markets

Building & Construction

Applications

Building & Construction — Infrastructure, Roads & Paving

Pavement, Highways, Roads & Bridges

Compatible Substrates & Surfaces

Concrete

Installation

The unit weight of Crafco RoadSaver 963 Gray Sealant is 12 lbs. per gallon (1.44 kg/L) at 60°F (15.5°C). Prior to use, the user must read and follow Installation Instructions for Hot-Applied RoadSaver, PolyFlex, Parking Lot and Asphalt Rubber Products to verify proper product selection, heating methods, pavement preparation procedures, application geometry, usage precautions and safety procedures. RoadSaver 963 Gray Sealant can only be reheated one time after initial heating and shall not be maintained at maximum heating temperature for more than 8 hours. These instructions are provided with each pallet of product.

Properties

Color

Grey

Physical Form

Granules,

Solid

Typical Properties
ValueUnitsTest Method / Conditions
Cone Penetration (122°F)max. 120-ASTM D5329
Cone Penetration (77°F)max. 75-ASTM D5329
Flexibility (20°F)Pass--
Flow (140°F)max. 5mmASTM D5329
Maximum Heating Temperature400.0°F-
Minimum Application Temperature380.0°F-
Resilience (77°F)min. 60%ASTM D5329
Specification Conformance

Crafco RoadSaver 963 Gray Sealant meets the following requirements when heated in accordance with ASTM D5167.

Packaging & Availability

Packaging Type

Bags

Packaging

Product is supplied in meltable bags each containing 35 lbs. (15.8 kg) of product with 60 bags per pallet. Bags are stacked and stretch wrapped on pallets containing approximately 2100 lbs. (953 kg). To use, the pallet wrap is removed, and individual bags are placed in Melter. There are no cardboard boxes or other components to open, empty, handle or dispose of. The bag melts into the product without affecting specification conformance.