Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Product Type
- Technologies
- Product Families
Features & Benefits
Applications & Uses
- Markets
- Application Method
- Cure Method
- Application Method
- Pad-print
Properties
- Color
- Typical Properties
- Typical Cured Properties
| Value | Units | Test Method / Conditions | |
| Conductivity | 0.01 | ohms/sq/mil | — |
| Value | Units | Test Method / Conditions | |
| Viscosity | 10,000 - 12,000 | cps | — |
| Filler | Silver | — | — |
| Percent Silver (cured) | min. 86 | — | — |
| Volume Resistance | 2.5e-05 | Ω-cm | — |
| Sheet Resistivity | 0.01 | Ω/sq./mil | — |
| Hydrolytic Stability | Excellent | — | — |
| Useful Temperature Range | 55 to 200 | ºC | — |
| Thermal Stability | Good to 200 | °C | — |
Regulatory & Compliance
- Certifications & Compliance
Safety & Health
- Safety & Handling
- Use with adequate ventilation.
- Keep away from sparks and open flames.
- Avoid prolonged contact with skin and breathing of vapors.
- Wash with soap and water to remove from skin
Storage & Handling
- Shelf Life
- 2 months at 25°C, 4 months at 5°C, 6 months at -10°C
- Suggested Handling & Curing
119-21 is ready to use as supplied. Further thinning may be accomplished by adding small amounts of CMI Thinner #113-39 (fast evaporating) and/or Thinner # 114- 20(slow evaporating). Prior to using, be certain to resuspend silver. Best properties, for most applications, result when cured for 45 minutes at 160°C or 30 minutes at 175°C. The use of B119-44 accelerator will allow for lower temperature curing providing good properties when cured from 50°C to 150°C. End user is advised to experimentally determine temperature and time best suited for individual applications.