Knowde Enhanced TDS
Identification & Functionality
- Product Type
- Technologies
Features & Benefits
Applications & Uses
- Application Method
- Compatible Substrates & Surfaces
Properties
- Typical Properties
Value | Units | Test Method / Conditions | |
Viscosity | 30,000 - 40,000 | cps | — |
Hydrolytic Stability | Excellent | — | — |
Useful Temperature Range | -70 to 260 | ºC | — |
Thermal Stability | Good to +325 | °C | — |
Peel Strength | 9 - 11 | lbs./inch | — |
Regulatory & Compliance
- Certifications & Compliance
Safety & Health
- Safety & Handling
- Contains flammable solvents.
- Use with adequate ventilation.
- Keep away from sparks and open flames.
- Avoid prolonged contact with skin and breathing of vapors.
- Wash with soap and water to remove from skin.
Storage & Handling
- Shelf Life
- 2 months at 25°C, 6 months at 5°C, 9 months at -20°C
- Suggested Handling & Curing
126-26 is ready to use as supplied. Further thinning may be accomplished by adding small amounts of 127-05 thinner. Apply thin film of material to both surfaces to be bonded. Dry at room temperature for approximately 10 to 20 minutes. At this point, the surfaces should be pressed firmly together. Best properties, for most applications, result when cured for 5 to 10 minutes at 160°C. Good properties are obtained on a variety of substrates by curing at temperatures ranging from 50°C to 180°C. Alternately, the assembled part can be cured at room temperature, allowing 1 week to develop full strength. Add 1-2% B507 catalyst when maximum strength and chemical resistance is needed. End user is advised to experimentally determine temperature and time best suited for individual applications.
- Shelf Life
2 months at 25°C; or 6 months at 5°C; or 9 months at -20°C. Catalyzed material must be stored at -40°C or below. Shelf life of catalyzed material is up to 2 months at -40°C.
*126-26 packaged in syringes must be kept frozen at -40°C