Knowde Enhanced TDS
Identification & Functionality
- Product Type
- Technologies
- Product Families
Features & Benefits
- Ready-to-Use Product Features
Applications & Uses
- Markets
- Application Area
- Cure Method
- Coating Type
Properties
- Typical Properties
| Value | Units | Test Method / Conditions | |
| Viscosity | 3000 | cps | — |
| Dielectric Strength | 365 | volts/mil | — |
| Volume Resistivity | 7.1 x 10^15 | Ω - cm | — |
| Dielectric Constant (1 kHz) | 4.3 | — | — |
| Dielectric Factor (60 Hz) | 0.018 | — | — |
| Solid Content | 100 | % | — |
| Specific Gravity | 1.07 | — | — |
| Coverage (at 1 mil) | 1600 | ft^2/gal | — |
Regulatory & Compliance
- Certifications & Compliance
Safety & Health
- Safety & Handling
- Use with adequate ventilation.
- Keep away from sparks and open flames.
- Avoid prolonged contact with skin and breathing of vapors.
- Wash with soap and water to remove from skin.
Storage & Handling
- Shelf Life
- 6 months at 25°C
- Suggested Handling & Curing
Material is ready to use as received. Store in cool area away from heat or sunlight. Cure using a 200-300 watt/inch mercury vapor lamp. Speed of cure will vary depending upon available energy. Typical cure time ranges from a few seconds to 1 minute when work is positioned 6 – 10 inches from lamp. Faster curing can be accomplished by moving lamp closer to work. When applying two layers, it is sometimes desirable to under-cure the first layer so as to improve interlayer adhesion.
- Shelf Life
- 6 months at 25°C in an unopened container.