Knowde Enhanced TDS
Identification & Functionality
- Technologies
- Product Families
Features & Benefits
Applications & Uses
- Applications
- Application Area
- Mixing Instructions
Premix 118-08 Part A, in original container prior to adding curing agent. Add Part B and mix until uniform. At this point the material may be thinned by adding small amounts of CMI 113-12 thinner.
Properties
- Typical Cured Properties
| Value | Units | Test Method / Conditions | |
| Viscosity | 20000 | cps | — |
| Volume Resistivity | 1x10^16 | ohm-cm | — |
| Dielectric Constant (50 Hz) | 4 | — | — |
| Hydrolytic Stability | Excellent | — | — |
| Useful Temperature Range | -55 to 200 | ºC | — |
| Thermal Stability | Good to 280 | °C | — |
Regulatory & Compliance
- Certifications & Compliance
Safety & Health
- Safety & Handling
Use with adequate ventilation. Keep away from sparks and open flames. Avoid prolonged contact with skin and breathing of vapors. Wash with soap and water to remove from skin. Note: It is not unusual for crystallization of the Part B to occur. Warm to 40-45°C in a water bath to return the material to its original viscosity. The crystallization does not affect the performance of the product in any way.
Storage & Handling
- Shelf Life
- 12 months at 25°C
- Shelf Life
- 12 months at 25°C, in unopened, unmixed containers.
- Cure Schedule
Part A Part B119-44 Mix ratio by weight 100 2 Cure schedule 80°C 4 hr. 100°C 1 hr. 125°C 30 min. 150°C 15 min. 175°C 10 min. Pot-Life at 25°C Up to 2 weeks (mixed)