Knowde Enhanced TDS
Identification & Functionality
- Product Type
- Technologies
- Product Families
Features & Benefits
- Labeling Claims
- Ready-to-Use Product Features
- Benefits
- Low odor
- Zero VOC’s (when fully cured)
- Excellent Flow Properties
- Excellent Printability
- Fast Cure
Applications & Uses
- Application Area
- Application Method
- Application Method
- Screen-print
Properties
- Typical Properties
Value | Units | Test Method / Conditions | |
Viscosity | 25000 | cps | — |
Dielectric Strength | 365 | volts/mil | — |
Volume Resistivity | 7.1 x 10^15 | ohm-cm | — |
Dielectric Constant (1 kHz) | 4.3 | — | — |
Dielectric Factor (60 Hz) | 0.018 | — | — |
Solid Content | 100 | % | — |
Specific Gravity | 1.13 | g/cc | — |
Screen Mesh* | 170-270 Polyester | — | — |
Screen Mesh* | 200-400 Stainless Steel | — | — |
Useful Temperature Range | 50 | ºC | — |
Regulatory & Compliance
- Certifications & Compliance
Safety & Health
- Safety & Handling
- Use with adequate ventilation.
- Keep away from sparks and open flames.
- Avoid prolonged contact with skin and breathing of vapors.
- Wash with soap and water to remove from skin.
Storage & Handling
- Shelf Life
- 6 months at 25°C
- Suggested Handling & Curing
Material is ready to use as received. Cure using a 200-300 watt/inch mercury vapor lamp. Speed of cure will vary depending upon available energy. Typical cure time ranges from a few seconds to 1minute when work is positioned 6-10 inches from lamp. Faster curing can be accomplished by moving lamp closer to work or increasing lamp intensity. When applying two layers, it is sometimes desirable to under-cure the first layer so as to improve interlayer adhesion.
- Shelf Life
- 6 months at 25°C. Some filler may settle during storage. Mix well prior to using to re-suspend filler.