Knowde Enhanced TDS
Identification & Functionality
- Base Oil Type
- Chemical Family
- Product Type
- Type
- Non-Curing Compound
- Technologies
- Product Families
Features & Benefits
- Labeling Claims
- Ready-to-Use Product Features
- Features
- Non-curing compound
- Highly water repellant
- Resistant to oxidation
- Low bleed
- Retains consistency over a temperature range
- Easy rework
- Non-toxic
- Benefits
- Oxidation resistant
- Non-corrosive
- Highly water repellent
- Withstand temperature extremes
- Chemically resistant
Applications & Uses
- Applications
- Compatible Substrates & Surfaces
- Typical Uses
- General Purpose - Waterproofing, corrosion protection, mold release, insulating, lubricant for plastic and rubber.
- Automotive - Battery terminal connections, spark plug ends and caps. Not recommended for high friction metal to metal lubrication.
- Electrical - Provides moisture resistance on electrical wiring, acts as a lubricant for power cable connections and as an oxide inhibitor on electrical contacts.
- Surface Preparation
All surfaces should be clean and dry.
- Application
CSL841 compound can be easily applied by brushing or wiping. For thin coatings the compound can be applied as a solvent dispersion. CSL841 is insoluble in water and alcohols. The suitability of a particular solvent should be based on testing prior to use.
Properties
- Color
- Physical Form
- Appearance
- Smooth, Translucent, Thixotropic Paste
- Physical Properties
- Typical Properties
| Value | Units | Test Method / Conditions | |
| Specific Gravity | 1.03 | - | - |
| Unworked Penetration (1/100mm) | 234.0 | - | ASTM D217 |
| Worked Penetration (1/100mm, 60 Strokes) | 245.0 | - | ASTM D217 |
| Worked Penetration (1/100mm, 200 Strokes) | 247.0 | - | ASTM D217 |
| Oil Separation (Bleed After 24h, 100°C, Weight) | 1.28 | % | ASTM D1742 |
| Oil Separation (Bleed After 24h, 200°C, Weight) | 7.35 | % | ASTM D1742 |
| Evaporation (After 24h, 100°C, Weight) | 0.84 | % | ASTM D972 |
| Evaporation (After 24h, 200°C, Weight) | 3.14 | % | ASTM D972 |
| Dielectric Strength | 96.01 | V/mil | ASTM D149 |
| Volume Resistivity | 4.1 × 10⁹ | ohms.cm | ASTM D257 |
| Dissipation Factor (100Hz) | 0.44 | - | ASTM D150 |
| Dissipation Constant (100Hz) | 5.75 | - | ASTM D150 |
| Value | Units | Test Method / Conditions | |
| Temperature Stabilty | -76 to 392 | °F | - |
Regulatory & Compliance
- Certifications & Compliance
Safety & Health
- Safety Precautions
CSL841 may cause slight discomfort if accidentally rubbed into the eyes. It is essentially non-irritating to the skin. See Safety Data Sheet (SDS) available on this product.
All work involving the application and use of this product should be performed in compliance with all relevant national, Health, Safety & Environmental standards & regulations.
Packaging & Availability
- Packaging
CSL841 is available in 80mL tubes, 1 US gallon cans, 19L (5 US gallon) pails and 189L (50 US gallon) drums.
Storage & Handling
- Storage
CSL841, when stored in original, unopened container in dry, shaded conditions, away from sources of heat or ignition, and stored at or below 32°C (90°F), has a shelf life of sixty (60) months (5 years) from date of manufacture.