Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Polymer Name
- Technologies
- Product Families
Features & Benefits
- Materials Features
- Product Benefits
- DAI-EL G-343 is a cure-incorporated copolymer of vinylidene fluoride and hexafluoropropylene which has good fluidity of molding.
- It is suitable for injection molding and transfer molding.
Applications & Uses
- Markets
- Plastics & Elastomers End Uses
- Plastics & Elastomers Processing Methods
Properties
- Color
- Appearance
- Milky white to pale yellow
- Physical Properties
- Physical Properties of Vulcanizate
- Note
- *1 The above values are representative and not guaranteed.
- *2 [Formula] DAI-EL G-343: 100 phr, MT carbon black (N990): 20 phr, Calcium hydroxide: 6 phr, Magnesium Oxide (high-active): 3 phr, [Curing condition] Press cure: 10min@170°C, Oven cure: 24hrs@230°C.
- *3 P-24 O-ring.
Value | Units | Test Method / Conditions | |
Compression Set (at 200°C,70 hours, 25% Compression*³) | 21 | % | — |
Elongation (at break) | 280 | % | ASTM D412 |
Fluorine Content | 66 | mass% | — |
Hardness (at 3 sec) | 64 | Shore A | ASTM D2240 |
Hardness (at Peak) | 72 | Shore A | ASTM D2240 |
Low Temperature Retraction (TR10) | -18 | °C | ASTM D1329 |
Mooney Viscosity (ML₁₊₁₀) (at 100°C) | 40 | MU | ASTM D1646 |
Mooney Viscosity (ML₁₊₁₀) (at 121°C) | 23 | MU | ASTM D1646 |
Specific Gravity (at 23°C) | 1.81 | — | ASTM D792 |
Tensile Strength | 13.6 | MPa | ASTM D412 |
Value | Units | Test Method / Conditions | |
100% Tensile Stress*² | 3.2 | MPa | ASTM D412 |
Safety & Health
- Handling Method / Safety Information
- Be sure to read the Safety Data Sheet (SDS) and precautions on the label before using.
- This product has been developed for industrial purpose and we shall not guarantee the safety if used for any other purposes. If it is going to be used for medical or food applications, please contact us in advance.
Packaging & Availability
- Packing Specification
20Kg