Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Polymer Name
- Technologies
- Product Families
Features & Benefits
- Materials Features
- Product Highlights
- DAI-EL G-704 is a cure-incorporated copolymer of vinylidene fluoride and hexafluoropropylene which has good fluidity of molding.
- It is suitable for injection molding and transfer molding.
Applications & Uses
- Applications
- Cure Method
- Plastics & Elastomers End Uses
- Plastics & Elastomers Processing Methods
Properties
- Physical Form
- Soluble in
- Lower ketones and esters
- Physical Properties
- Physical Properties of Vulcanizate
- Note
- *1 The above values are representative and not guaranteed.
- *2 [Formula] DAI-EL G-704: 100 phr, MT carbon black (N990): 20 phr, Calcium hydroxide: 6 phr, Magnesium Oxide (high-active): 3 phr, [Curing condition] Press cure: 10min at 170°C, Oven cure: 24hrs at 230°C.
- *3 P-24 O-ring.
| Value | Units | Test Method / Conditions | |
| Fluorine Content | 66 | mass% | — |
| Mooney Viscosity (ML₁₊₁₀) (at 100°C) | 47 | MU | ASTM D1646 |
| Mooney Viscosity (ML₁₊₁₀)(at 121°C) | 30 | MU | ASTM D1646 |
| Specific Gravity (at 23°C) | 1.81 | — | ASTM D792 |
| Value | Units | Test Method / Conditions | |
| 100% Tensile Stress*² | 3.5 | MPa | ASTM D412 |
| Compression Set (70hours at 200°C, 25% Compression*³)*² | 22 | % | — |
| Elongation (at break)*² | 240 | % | ASTM D412 |
| Hardness (at 3 sec)*² | 67 | Shore A | ASTM D2240 |
| Hardness (at Peak)*² | 71 | Shore A | ASTM D2240 |
| Low Temperature Retraction (TR10)*² | -18 | °C | ASTM D1329 |
| Tensile Strength*² | 13.4 | MPa | ASTM D412 |
Safety & Health
- Handling Method / Safety Information
- Be sure to read the Safety Data Sheet (SDS) and precautions on the label before using.
- This product has been developed for industrial purpose and we shall not guarantee the safety if used for any other purposes. If it is going to be used for medical or food applications, please contact us in advance.
Packaging & Availability
- Packing Specification
20 Kg