Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Polymer Name
- Technologies
- Product Families
Features & Benefits
- Product Benefits
- DAI-EL G-763F is a cure-incorporated copolymer of vinylidene fluoride and hexafluoropropylene which is suitable for injection molding.
- It provides excellent roll mixing processability, fluidity of molding and scorch resistance.
- It provides excellent compression set.
Applications & Uses
- Applications
- Plastics & Elastomers End Uses
- Plastics & Elastomers Processing Methods
Properties
- Physical Form
- Soluble in
- Lower ketones and esters
- Physical Properties
- Physical Properties of Vulcanizate
- Note
*1 The above values are representative and not guaranteed.
*2 [Formula] DAI-EL G-7211: 100 phr, MT carbon black (N990): 20 phr, Calcium hydroxide: 6 phr, Magnesium Oxide (high-active): 3 phr, [Curing condition] Press cure: 10min@170°C, Post cure: 24hrs@230°C.
*3 P-24 O-ring
| Value | Units | Test Method / Conditions | |
| Compression Set (at 200°C,70 hours, 25% Compression*³) | 11 | % | — |
| Elongation (at break) | 200 | % | ASTM D412 |
| Fluorine Content | 66 | mass% | — |
| Hardness (at 3 sec) | 67 | Shore A | ASTM D2240 |
| Hardness (at Peak) | 72 | Shore A | ASTM D2240 |
| Low Temperature Retraction (TR10) | -18 | °C | ASTM D1329 |
| Mooney Viscosity (ML₁₊₁₀) (at 100°C) | 40 | MU | ASTM D1646 |
| Mooney Viscosity (ML₁₊₁₀) (at 121°C) | 23 | MU | ASTM D1646 |
| Specific Gravity (at 23°C) | 1.81 | — | ASTM D792 |
| Tensile Strength | 13.3 | MPa | ASTM D412 |
| Value | Units | Test Method / Conditions | |
| 100% Tensile Stress*² | 4.3 | MPa | ASTM D412 |
Safety & Health
- Handling Method / Safety Information
- Be sure to read the Safety Data Sheet (SDS) and precautions on the label before using.
- This product has been developed for industrial purpose and we shall not guarantee the safety if used for any other purposes. If it is going to be used for medical or food applications, please contact us in advance.