DAI-EL - G-8002 - Daikin Industries - FKM - Sheets

Identification & Functionality

Features & Benefits

Materials Features: Acid Resistant,
Good Mechanical Properties,
Odorless,
Steam Resistant
Product Highlights: DAI-EL G-8002 is a peroxide curable copolymer of vinylidene fluoride and hexafluoropropylene which is suitable for injection and extrusion molding.

It provides superior mechanical properties and resistance to steam and acids compared with bisphenol curable products.

Applications & Uses

Markets: Automotive & Transportation,
Industrial
Applications: Automotive & Transportation — Automotive
Cooling & Climate,
Powertrain & UTH
Industrial — Chemical & Industrial Manufacturing
Equipment & Parts
Cure Method: Chemical Cure
Plastics & Elastomers End Uses: Diaphragms,
O Rings,
Turbo Charger Hose
Plastics & Elastomers Processing Methods: Extrusion,
Injection Molding

Properties

Color: Yellow
Physical Form: Sheets
Soluble in: Lower ketones and esters
Physical Properties
Physical Properties of Vulcanizate
Note: *¹ The above values are representative and not guaranteed.

*² [Formula] DAI-EL G-8002: 100 phr, MT carbon black (N990): 20 phr, Triallylisocyanurate (72% active): 4 phr, 2,5-dimethyl-2,5-di(t-butylperoxy)hexane (45% active): 3.3 phr, [Curing condition] Press cure: 10min at 160°C, Post cure: 4hrs at 180°C.

*³ P-24 O-ring.

	Value	Units	Test Method / Conditions
100% Tensile Stress*²	2	MPa	ASTM D412
Compression Set (70hours at 200°C, 25% Compression³)²	24	%	—
Elongation (at break)*²	400	%	ASTM D412
Hardness (at 3 sec)*²	63	Shore A	ASTM D2240
Hardness (at Peak)*²	66	Shore A	ASTM D2240
Low Temperature Retraction (TR10)*²	-19	°C	ASTM D1329
Tensile Strength*²	21.9	MPa	ASTM D412

Safety & Health

Handling Method / Safety Information: Be sure to read the notes on SDS and labels before use.

This product is intended for general industry, and therefore its adequacy and safety as a raw material for medical purposes cannot be guaranteed.

Packaging & Availability

DAI-EL G-8002