Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Polymer Name
- Technologies
- Product Families
Features & Benefits
- Materials Features
- Product Highlights
- DAI-EL G-801 is a peroxide curable copolymer of vinylidene fluoride and hexafluoropropylene which is suitable for transfer and compression molding.
- It provides superior mechanical properties and resistance to steam and acids compared with bisphenol curable products.
Applications & Uses
- Applications
- Cure Method
- Plastics & Elastomers End Uses
- Plastics & Elastomers Processing Methods
Properties
- Color
- Physical Form
- Soluble in
- Lower ketones and esters
- Physical Properties
- Physical Properties of Vulcanizate
- Note
*1 The above values are representative and not guaranteed.
*2 [Formula] DAI-EL G-801: 100 phr, MT carbon black (N990): 20 phr, Triallylisocyanurate (100% active): 4 phr, 2,5-dimethyl-2,5-di(t-butylperoxy)hexane (100% active): 1.5 phr, [Curing condition] Press cure: 10min at 160°C, Post cure: 4hrs at 180°C.
*3 P-24 O-ring.
Value | Units | Test Method / Conditions | |
Fluorine Content | 66 | mass% | — |
Mooney Viscosity (ML₁₊₁₀) (at 100°C) | 70 | MU | ASTM D1646 |
Mooney Viscosity (ML₁₊₁₀)(at 121°C) | 37 | MU | ASTM D1646 |
Specific Gravity (at 23°C) | 1.81 | — | ASTM D792 |
Value | Units | Test Method / Conditions | |
100% Tensile Stress*² | 1.8 | MPa | ASTM D412 |
Compression Set (70hours at 200°C, 25% Compression*³)*² | 28 | % | — |
Elongation (at break)*² | 440 | % | ASTM D412 |
Hardness (at 3 sec)*² | 60 | Shore A | ASTM D2240 |
Hardness (at Peak)*² | 65 | Shore A | ASTM D2240 |
Low Temperature Retraction (TR10)*² | -19 | °C | ASTM D1329 |
Tensile Strength*² | 21.8 | MPa | ASTM D412 |
Safety & Health
- Handling Method / Safety Information
- Be sure to read the notes on SDS and labels before use.
- This product is intended for general industry, and therefore its adequacy and safety as a raw material for medical purposes cannot be guaranteed.
Packaging & Availability
- Packing Specification
20 Kg