Search
the marketplace
through 230,000 Chemicals and Raw Ingredients
through 8,000+ Supplier owned storefronts
company tower banner
Daikin Industries, Ltd. Company Logo

DAIFREE GA-9700M

1 of 17 products in this brand
DAIFREE GA-9700M is tailored for elastomers and plastics, ensuring PFOA and PFOS-free mold release. With a core ingredient of fluorocarbon, it guarantees efficient mold release while adhering to environmental standards like TSCA and RoHS. Designed for industrial applications such as chemical manufacturing and tooling, it minimizes residue and reduces cleaning demands. This liquid-form product is compatible with various polymers like ABS, EPDM, FKM, and PVC, making it ideal for electrical and electronic applications.

Functions: Mold Release Agent, Release Agent

Chemical Family: Fluoropolymers, Silicon-based Compounds

Labeling Claims: PFOA-free, PFOS-free

Compatible Polymers & Resins: Acrylonitrile Butadiene Styrene (ABS), Chloroprene Rubber (CR), Epoxies (EP), Ethylene Propylene Diene Monomer (EPDM), Fluoroelastomer (FKM), Nitrile Butadiene Rubber (NBR), Phenolic Resins, Polyacrylate Rubber (ACM), Polyethylenes (PE), Polypropylenes (PP), Polyvinyl Chloride (PVC), Styrene Butadiene Rubber (SBR), Unsaturated Polyester (UPE)

End Uses: Electrical/Electronic Applications

    Knowde Enhanced TDS

    Identification & Functionality

    Chemical Family

    Fluoropolymers,

    Silicon-based Compounds

    Plastics & Elastomers Functions

    Mold Release Agent,

    Release Agent

    Technologies

    Elastomers,

    Plastics

    Product Families

    Elastomers — Elastomer Additives

    Performance Additives

    Plastics — Polymer Additives

    Performance Additives

    Features & Benefits

    Labeling Claims

    PFOA-free,

    PFOS-free

    Materials Features

    Good Mold Release,

    Non Stick

    Applications & Uses

    Markets

    Industrial

    Applications

    Industrial — Chemical & Industrial Manufacturing

    Tooling & Moldmaking

    Compatible Polymers & Resins

    Acrylonitrile Butadiene Styrene (ABS),

    Chloroprene Rubber (CR),

    Epoxies (EP),

    Ethylene Propylene Diene Monomer (EPDM),

    Fluoroelastomer (FKM),

    Nitrile Butadiene Rubber (NBR),

    Phenolic Resins,

    Polyacrylate Rubber (ACM),

    Polyethylenes (PE),

    Polypropylenes (PP),

    Polyvinyl Chloride (PVC),

    Styrene Butadiene Rubber (SBR),

    Unsaturated Polyester (UPE)

    Plastics & Elastomers End Uses

    Electrical/Electronic Applications

    Applications

    Rubbers

    SBR, NBR,EPDM,FKM,CR,ACM, etc.

    Thermosetting resins

    Epoxy, Unsaturated polyester, Phenol, etc.

    Thermoplastics

    PE, PP, PVC, ABS, etc.

    Properties

    Physical Form

    Liquid

    Physical Properties
    ValueUnitsTest Method / Conditions
    Fire Service ActFlammable——
    NET420ml—
    Principal SolventIsooctane——
    PropellantLPG——
    Note

    The above values in properties are representative and not guaranteed.

    Regulatory & Compliance

    Certifications & Compliance

    RoHS Compliant

    Chemical Inventories

    TSCA (USA)

    Technical Details & Test Data

    Method of Use

    How to apply

    • Shake the can well, hold it about 20‐30cm away from the mold, and then spray lightly so that a thin uniform film is formed.
    • Before using the product for the first time, remove the old release agent completely. Use the steps in ‘(2) Cleaning the mold’ below to clean correctly.

    Cleaning the mold

    • Slight contamination of the mold release agent can usually be removed to a certain degree by wiping with a solvent (IPA, toluene, acetone).
    • Alkaline cleaning agents are effective for complete removal. (Immerse in an approx. 10% aqueous solution of potassium hydroxide or sodium hydroxide to which a small amount of surfactant has been added. The cleaning solution should be at a temperature of 60‐80°C)

    Use temperature range

    From room temperature to 200°C

    Safety & Health

    Handling / Safety Information
    • Be sure to read the Safety Data Sheet (SDS) and precautions on the label before using.
    • This product has been developed for industrial purposes and we shall not guarantee the the safety if used for any other purposes. If it is going to be used for medical or food applications, please contact us in advice.

    Packaging & Availability

    Packaging Type

    Cans,

    Cartons

    Package Size
    • 20cans / 1 carton
    • Aerosol can