Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Polymer Name
- Plastics & Elastomers Functions
- Technologies
Features & Benefits
- Materials Features
- Product Highlights
- NEOFLON CPT LP-1030 is a copolymer of tetrafluoroethylene and perfluoroalkyl vinyl ether in which main chain the third monomer added.
- Except for some chlorine-based solvents, it is hardly affected by organic solvents, acids and alkalis.
- A fluoropolymer with excellent low permeability to volatile chemicals, water vapor, and gasses.
- A fluoropolymer with excellent light transmittance in the ultraviolet to visible light range.
- The mechanical properties of CPT LP-1030 are almost the same as PFA and FEP.
- It can be melt-molded as a thermoplastic resin by extrusion molding of tubes and films, compression molding and the like.
- CPT LP-1030 is capable of molding multi-layer tubes by coextrusion with PFA.
- Multi-layer tube with PFA is used for applications that require barrier properties in chemical liquid piping for semiconductors.
Applications & Uses
- Applications
- Plastics & Elastomers End Uses
- Plastics & Elastomers Processing Methods
Properties
- Color
- Physical Properties
- Note
The above values in properties are representative values, not guaranteed values.
| Value | Units | Test Method / Conditions | |
| Bulk Density | 1.23 | g/ml | JIS K 6891 |
| Elongation | 370 | % | ASTM D 7471 |
| Melting Point | 248 | ℃ | ASTM D 7471 |
| MFR (at 297℃, 49N Load) | 8 | g/10min | ASTM D 7471 |
| Specific Gravity | 2.13 | — | ASTM D 7471 |
| Tensile Strength | 37 | MPa | ASTM D 7471 |
Safety & Health
- Handling Method / Safety Information
- Be sure to read the notes on SDS and labels before use.
- This product is intended for general industry, and therefore its adequacy and safety as a raw material for medical purposes cannot be guaranteed.
Packaging & Availability
- Packing Specification
25 Kg